High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Mounting type | Nuts |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Number of fixing points | 3 pcs |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Surface: varnished · Manufacturer: Simonini · Mounting type: Welded lug · Number of fixing points: 1 pcs · Material: Steel · Total length: 830 mm · Ø Silencer: 60 mm · Ø outside: 95 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
CHF 184.90
HOMOET exhaust "P6 Special" (longer center section) | Puch
Manufacturer: HOMOET · Mounting type: Welded lug · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Number of fixing points: 1 pcs · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
CHF 294.90
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Mounting type: Tab · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Total length: 900 mm · Ø Silencer: 50 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
CHF 284.90
MOTIP heat-resistant paint black 400 ml
Manufacturer: MOTIP · Temperature resistance (min.): 0 - 800 °C · Contents: 400 ml · Color: black · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
MOTIP heat-resistant clear lacquer (matt) 400 ml
Manufacturer: MOTIP · Temperature resistance (min.): 0 - 800 °C · Contents: 400 ml · Color: transparent · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Area of application: Tuning · Number of components: 3 pcs
CHF 17.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Cable length: 2200 mm
CHF 2.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Cable length: 1600 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Height: 30 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Hole spacing: 137.5 mm · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Ø outside: 130 mm · Height: 88 mm · Total length: 160 mm · Width: 150 mm · Number of fixing points: 2 pcs
CHF 149.90
Airsal piston 46 mm | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 98 g
CHF 37.90
Polini CP 21 mm carburetor (hand choke) rubber flange
Nominal diameter: 21 mm · Manufacturer: Polini · Mounting type: Rubber sleeve · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Total length: 71 mm · Height: 132 mm · Width: 66 mm · Nozzle size: 100 · Camouflaged: No · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 42 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Size of secondary nozzle: 40
CHF 139.90
Polini 43.5 mm cylinder kit reed valve with head | Puch
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Racing · Area of application: Tuning
CHF 399.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
