
High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Surface | blank |
| Manufacturer | AKOA |
| Material | Steel |
| Number of fixing points | 3 pcs |
| Ø Silencer | 60 mm |
| Total length | 940 mm |
| Mounting type | Nuts |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Ø outside: 95 mm · Total length: 830 mm · Material: Steel · Surface: varnished · Ø Internal connection: 23 mm · Ø Silencer: 60 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange · Mounting type: Welded lug
CHF 184.90
HOMOET Exhaust "P6 Special" 28 mm polished | Puch Maxi, X30
Manufacturer: HOMOET · Ø outside: 88 mm · Total length: 935 mm · Material: Steel · Surface: blank · Ø Internal connection: 24 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange · Mounting type: Welded lug
CHF 294.90
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Color: gray · Manufacturer: HOMOET · Ø outside: 88 mm · Total length: 900 mm · Material: Steel · Surface: raw · Surface: varnished · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts · Mounting type: Tab
CHF 289.90
Not in stock
MOTIP heat-resistant paint black 400 ml
Temperature resistance (min.): 0 - 800 °C · Color: black · Manufacturer: MOTIP · Contents: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
MOTIP heat-resistant clear lacquer (matt) 400 ml
Temperature resistance (min.): 0 - 800 °C · Color: transparent · Manufacturer: MOTIP · Contents: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Material: Graphite / Graphite · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
CHF 7.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90









