Muffler

Nut M7 galvanized

Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: M7x1 (standard thread) · Drive: External hexagon · Height: 5.3 mm · Strength class: 8 · Width across flats SW: 11 mm · Area of application: Standard

Silicone seal Ø 45 x 2 silencer | Puch

Manufacturer: Puch · Material: Silicone · Place of use: Exhaust · Nominal diameter: 45 mm · Thickness: 2.9 mm · Ø inside: 45 mm · Ø outside: 52 mm · Area of application: Standard

Exhaust clamp 70 mm chrome wide version.

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 67 - 71 mm · Nominal diameter: 70 mm · Width: 28 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm · Thickness: 2 mm

swiing® ingenious exhaust clamp 28 mm heat-resistant

Manufacturer: swiing® ingenious parts · Material: FPM - Rubber · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 40 mm · Width: 40 mm · Mounting type: Nuts & bolts · Ø inside: 25 - 28 mm

swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

GPO exhaust clamp 70 mm chrome (version 2.0)

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 66 - 70 mm · Nominal diameter: 70 mm · Width: 18 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.5 mm · Thickness: 2.5 mm

swiing® ingenious flute insert exhaust reinforced | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Color: silver · Total length: 98 mm · Ø inside: 11.9 mm · Ø outside: 14 mm

GPO exhaust clamp 60 mm chrome (version 2.0)

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 57 - 60 mm · Nominal diameter: 60 mm · Width: 18 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.5 mm · Thickness: 2.5 mm

Insulating wool exhaust 25 x 40 cm

Material: Ceramics · Color: white · Width: 400 mm · Height: 220 mm · Thickness: 10 mm

Exhaust 22 mm original 2-piece | Puch Maxi S, N

Manufacturer: Puch · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Flange · Number of fixing points: 6 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Stud bolts & nuts

swiing® ingenious special nut M7 flute insert exhaust | Puch

Manufacturer: swiing® ingenious parts · Thread length: 9 mm · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: M7x1 (standard thread) · Width: 14 mm · Height: 9 mm · Ø outside: 11.9 mm

Washer special silencer | Puch

Material: Steel · Surface: blue galvanized · Thread size: M6 · Nominal diameter (thread): 7 mm · Thickness: 2.9 mm · Ø inside: 7 mm · Ø outside: 16 mm · Area of application: Standard

GPO exhaust cigar Ø 28 / 60 mm | Sachs 50/2, 503

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 535 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 60 mm

Rear muffler cigar Ø 28 / 70 mm chrome

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 700 mm · Ø Internal connection: 28.6 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

Exhaust clamp 60 mm chrome (1A quality)

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 56 - 60 mm · Nominal diameter: 60 mm · Width: 20 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm · Thickness: 2.3 mm

GPO silencer | Puch

Manufacturer: GPO · Material: Aluminum · Total length: 240 mm · Ø inside: 11.5 mm · Ø outside: 55 mm

Bullet cigar Ø 28 / 70 mm chrome (reso exhaust)

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 740 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

66HEROES Exhaust bracket 75 mm flat Inox

Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: electropolished · Total length: 106 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 75 mm · Thickness: 4 mm

GPO exhaust flute Ø 28 / 60 mm original | Sachs 50/2, 503

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 560 mm · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Ø outside: 20 mm · Flame tube attachment: Plug connection clamped

swiing® ingenious special disk flute insert exhaust (reinforced) | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Color: silver · Height: 4.5 mm · Ø inside: 7.1 mm · Ø outside: 11.6 mm · Ø outside: 15 mm

66HEROES Exhaust bracket 100 mm flat Inox

Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: electropolished · Total length: 130 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 100 mm · Thickness: 4 mm

Exhaust clamp 70 mm black

Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Clamping diameter: 67 - 71 mm · Nominal diameter: 70 mm · Width: 28 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.9 mm · Thickness: 2 mm

swiing flute Ø 28 / 70 mm chrome (reso exhaust)

Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Ø outside: 70 mm

66HEROES Exhaust bracket 50 mm flat Inox

Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: electropolished · Total length: 81 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 50 mm · Thickness: 4 mm

TECNO Exhaust insulating wool 39 x 61 cm

Manufacturer: TECNO · Material: Ceramics · Color: white · Width: 610 mm · Height: 390 mm · Thickness: 10 mm

Collar nut M7 without serration

Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M7x1 (standard thread) · Drive: External hexagon · Ø outside: 16 mm

swiing cigar Ø 28 / 70 mm black (reso exhaust)

Manufacturer: swiing · Material: Steel · Surface: varnished · Color: black · Total length: 730 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

Silencer replica | Puch

Material: Aluminum · Total length: 240 mm · Ø inside: 11.5 mm · Ø outside: 55 mm

GPO exhaust clamp 55 mm chrome

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Nominal diameter: 55 mm · Width: 18 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm

swiing cigar Ø 32 / 70 mm chrome (reso exhaust)

Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Ø Internal connection: 32 mm · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

Exhaust bracket Inox | Puch Maxi N

Manufacturer: Made in Netherlands · Material: Chrome steel (stainless steel) · Number of fixing points: 2 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 10 mm · Hole spacing: 50 mm · Thickness: 3 mm · Cranking (offset): 20 mm

Spring washer M7 Inox

Material: Chrome steel (stainless steel) · Thread size: M7 · Nominal diameter (thread): 7 mm

GPO exhaust clamp 55 mm chrome (version 2.0) | Puch X30 Velux

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 53 - 55 mm · Nominal diameter: 55 mm · Width: 15 mm · Number of fixing points: 1 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 9.1 mm · Thickness: 2 mm · Ø outside: 57 mm · Ø outside: 59 mm

Flute insert replica | Puch

Material: Steel · Surface: blue galvanized · Color: silver · Total length: 102 mm · Ø inside: 11.8 mm · Ø outside: 13.8 mm

Insulating wool (balls)

Manufacturer: Made in Portugal · Material: Fabric insert · Surface: raw · Color: beige · Total length: 26 mm · Ø inside: 39 mm · Ø outside: 45.5 mm

Rear silencer cigar Ø 32 / 70 mm chrome

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 700 mm · Ø Internal connection: 32 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

Bent exhaust bracket

Material: Steel · Surface: blue galvanized · Number of fixing points: 2 pcs · Hole spacing: 38 mm · Thickness: 3 mm · Cranking (offset): 15 mm

Exhaust clamp 65 mm (1A quality)

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Nominal diameter: 65 mm · Width: 20 mm · Number of fixing points: 1 pcs

GPO exhaust silencer | Puch X30 Velux

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome

Exhaust clamp solid 27 - 28 mm Inox | Sachs 503

Manufacturer: Made in Switzerland · Material: Chrome steel (stainless steel) · Ø inside: 27 - 28 mm · Color: silver · Width: 16 mm · Material thickness: 0.8 mm · Mounting type: Nuts & bolts

swiing® ingenious counter cone self-assembly Reso | Puch

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Total length: 20.8 mm · Ø inside: 15 mm · Ø inside: 23 mm · Ø outside: 42 mm · Ø outside: 48 mm · Ø outside: 53 mm

Sidepipe silencer Ø 28 / 60 mm chrome

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 600 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Sidepipe · Ø outside: 60 mm

Exhaust Boss Demper Ø 28 / 60 mm chrome

Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 580 mm · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Mounting type: Screwed clamp · Exhaust type: Dragpipe / sharp end · Ø outside: 60 mm · Flame tube attachment: Plug connection clamped

Rear muffler cigar Ø 28 / 70 mm black

Manufacturer: Made in Portugal · Material: Steel · Color: black · Total length: 700 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

swiing flute Ø 32 / 70 mm chrome (reso exhaust)

Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 785 mm · Ø Internal connection: 32 mm · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Ø outside: 25 mm · Flame tube attachment: Plug connection clamped

GPO flute muffler Ø 28 / 55 mm | Sachs

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 570 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Ø outside: 55 mm

Biturbo muffler 28 mm chrome / gold

Manufacturer: Biturbo · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: gold · Total length: 670 mm · Ø Internal connection: 28.5 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Exhaust type: Cone / double cone

swiing® revival set exhaust revision | Puch X30 Velux

Manufacturer: swiing® revival parts · Material: Steel

Exhaust clamp 60 mm black

Manufacturer: Made in Portugal · Material: Steel · Surface: blackened · Color: black · Nominal diameter: 60 mm · Width: 20 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm

swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust) camouflaged | Puch Maxi S, N

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 70 mm

Exhaust Boss Demper Ø 28 / 60 mm with lug chrome | Puch

Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 580 mm · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Exhaust type: Dragpipe / sharp end · Ø outside: 60 mm · Flame tube attachment: Plug connection clamped

Heat protection plate black NOS | Puch Maxi S, N NOS | X30 NS, N-2AH

Manufacturer: Puch · Material: Steel · Surface: varnished · Color: black-matt · Total length: 375 mm

GPO end piece exhaust original look | Puch X30 Velux

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 205 mm · Ø Silencer: 56 mm · Ø inside: 6.5 mm

Exhaust clamp 50 mm galvanized

Manufacturer: Made in Portugal · Material: Steel · Surface: blue galvanized · Nominal diameter: 50 mm · Width: 20 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm

swiing® revival silencer 2-piece | Puch

Manufacturer: swiing® revival parts · Material: Aluminum · Total length: 224 mm · Ø inside: 7.3 mm · Ø inside: 14.3 mm · Ø outside: 54.5 mm

swiing® ingenious silencer counter-cone set | Puch

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Surface: raw · Color: graphite colors · Color: red · Total length: 210 mm · Ø inside: 14.3 mm · Ø outside: 54.5 mm · Alternative version of the Puch spare part no.: 349.1.16.011.0

GPO cigar exhaust Ø 28 / 60 mm (black / chrome) | Sachs

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Total length: 535 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø outside: 60 mm