World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and considerably reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
The set includes the following fixed parts:
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Nominal diameter: 47 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 308.90
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Thickness: 20.3 mm · Area of application: Racing
CHF 309.90
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 209.90
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 252.90
Not in stock
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs
CHF 249.90
Not in stock
Polini CP 23 mm carburetor (hand choke)
Manufacturer: Polini · Total length: 71.3 mm · Width: 66 mm · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 23 mm · Carburetor type: CP · Mounting type: Plug connection clamped · Ø Inside entrance: 23 mm · Height: 136 mm · Ø Output inside: 23 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 110 · Size of secondary nozzle: 40
CHF 149.90
Not in stock
Moped fans like you also bought:
Stage6 R/T RT-PWK 24 mm carburetor Stage6 *Black Edition*
Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Carburetor type: RT-PWK · Color: black · Nominal diameter: 24 mm · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning
CHF 167.90
VOCA silencer black with 3-point mount
Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Ø inside: 20.3 mm · Total length: 220 mm · Total length: 235 mm · Color: black · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm
CHF 89.90
VOCA silencer red with 3-point mount
Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Total length: 220 mm · Color: black · Color: red · Ø Silencer: 60.8 mm · Ø inside: 20.3 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm · Thread type: M6x1 (standard thread)
CHF 89.90
Collection only possible with online purchase and appointment.
