Polini CP 21 carburetor for your racing moped, moped and small motorcycle. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main throttle body: 100
Installed secondary throttle body: 40
Ø Nominal: 21 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Material | Aluminum |
| Camouflaged | No |
| Area of application | Tuning, Racing, Performance |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Nominal diameter | 21 mm |
| Total length | 71 mm |
| Width | 66 mm |
| Height | 132 mm |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 22.5 mm |
| Ø Air filter connection | 47 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Mounting type | Rubber sleeve |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
Accessories & related products
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Drive: External hexagon · Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
CHF 39.90
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: CP · Choke control: Hand choke · Nozzle size: 62 · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Size of secondary nozzle: 40
CHF 139.90
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Drive: External hexagon · Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
CHF 39.90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Total length: 83 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Size of secondary nozzle: 45 · Width: 65 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 144.90
Not in stock
Polini CP 19 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: CP · Nominal diameter: 19 mm · Total length: 71 mm · Ø Inside entrance: 42 mm · Width: 66 mm · Ø Output inside: 21.8 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 90 · Size of secondary nozzle: 40 · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 149.90
Polini CP 23 mm carburetor (cable choke) rubber flange
Manufacturer: Polini · Total length: 71 mm · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nominal diameter: 23 mm · Ø Inside entrance: 42 mm · Width: 66 mm · Ø Output inside: 25 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 110 · Size of secondary nozzle: 40 · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 139.90
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Area of application: Tuning · Color: blue · Total length: 28 mm
CHF 17.90
Oil filler plug with sealing ring | Puch Maxi
Thread type: M10x1.5 (standard thread) · Screw head: Lens head · Material: Steel · Surface: galvanized (blue) · Drive: Slot · Number of components: 2 pcs · Thread length: 6 mm · Ø External head: 14 mm · Total length: 14.6 mm · Puch OEM number: 364.1.10.660.1
CHF 3.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Number of fixing points: 4 pcs · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm
CHF 209.90
Collection only possible with online purchase and appointment.
