High-quality throttle cable (inner cable) suitable for all throttle grips and all Bing carburetors of various mopeds, mopeds and small motorcycles.
This cable was also used on motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Zündapp, etc..
Ø Throttle cable: 1.25 mm
Cable length: 2.2 m (= 220 cm)
Ø Nipple: 3 mm
Nipple length: 5 mm
A quality product manufactured in Germany.
Details
Ø nipple | 3 mm |
Nipple length | 5 mm |
Manufacturer | Made in Germany |
Material | Steel |
Ø Stranded wire | 1.25 mm |
Number of components | 1 pcs |
Surface | galvanized (blue) |
Nipple shape | Cylinder |
Cable length | 2200 mm |
Area of application | Standard |
Suitable for the following models
Universal | |
Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Zündapp Belmondo | |
Tomos | |
Alpa Chopper / Turbo | |
DKW | |
ILO / JLO | |
Kreidler | Flory MF Foil |
MBK |
Miele | |
Monark | |
Victoria | |
Zündapp | 434 Chassis (mountaineer) 278 Motor |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm
CHF 2.00
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 14.70
CHF 73.50/l
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Total length: 15 mm · Manufacturer: Magura · Area of application: Standard · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Ø outside: 8 mm
CHF 2.50
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm
CHF 2.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Surface: galvanized (blue) · Nipple shape: Pears · Area of application: Standard · Cable length: 2250 mm · Piaggio OEM number: 270460
CHF 2.40