Strengthened clutch springs to fit the clutch of your Puch moped / moped with E50 engine.
These tuning springs are 20 % harder than the original springs, making them ideal for use in moderately tuned engines.
With tuned engines, the clutch often engages too early when the engine is not yet up to speed. With the tuning springs, the centrifugal clutch engages later and the extra power is optimally transferred to the rear wheel.
The scope of delivery includes 3 pieces.
| Spring design | Pressure spring |
| Ø wire | 1.7 mm |
| Number of components | 3 pcs |
| Manufacturer | swiing® ingenious parts |
| Material | Spring steel |
| Surface | coated |
| Color | blue |
| Ø inside | 4.8 mm |
| Ø outside | 8.3 mm |
| Total length | 28 mm |
| Area of application | Tuning |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Number of fixing points: 4 pcs · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Color: sand-colored · Number of components: 1 pcs · Material: Sealing paper · Thickness: 0.35 mm · Puch OEM number: 349.1.10.349.1
CHF 2.40
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
CHF 17.90
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.9 mm · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
CHF 17.90
Explore categories from Clutch
Moped fans also bought
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
CHF 79.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Ø outside: 116 mm · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 2.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 968 g · Number of gears: 1 pcs
CHF 179.90
Collection only possible with online purchase and appointment.
