Hot 
Clutch puller with thread protection sleeve for your Puch Maxi moped / moped with E50 engine.
The galvanized steel clutch puller is easy to use and a must for every Puch workshop.
Use the cylinder screws to secure the tool to the clutch pack. By screwing in the large hexagon head screw, you can remove the entire clutch.
You can find clutches and springs in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Steel |
| Surface | blackened |
| Area of application | (Dis)assembly tool |
| Universal | |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Number of components: 3 pcs · Total length: 28 mm · Area of application: Tuning
CHF 17.90
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 299.90
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Nut type: Hexagon nut 0.8D · Surface: galvanized (blue) · Drive: External hexagon · Nominal diameter (thread): 10 mm · Thread type: MF10x1 (fine pitch thread) · Height: 8 mm · Width across flats: 17 mm
CHF 3.90
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Recording type: Cone mounting · Number of springs: 3 pcs · Thickness: 21.2 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 419.90
CHF 369.90
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Color: red · Surface: coated · Total length: 26.6 mm · Area of application: Tuning
CHF 17.90
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: yellow · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Number of components: 3 pcs · Total length: 26.9 mm · Area of application: Tuning
CHF 17.90
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Screw head: Hexagon · Nominal diameter (thread): 12 mm · Thread length: 42 mm · Drive: External hexagon · Thread type: MF12x1.25 (fine pitch thread) · Number of components: 1 pcs · Width across flats: 19 mm · Area of application: Special tool · Area of application: Workshop accessories
CHF 8.90
Explore categories from Clutch
Moped fans also bought
Hot
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
CHF 49.90
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
CHF 9.90
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
CHF 9.90
CHF 8.90
GPO piston stopper M14x1.25
Manufacturer: GPO · Number of components: 1 pcs · Material: Steel · Diameter: 12 mm · Diameter: 16 mm · Surface: galvanized (blue) · Total length: 83 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 17 mm · Area of application: Special tool
CHF 9.50
CHF 8.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Working late? Evening hours on Thursday until 20:00
