Intake system with a four-valve diaphragm insert for PHBG carburetors, compatible with the Polini racing cylinder on your Puch moped as well as your Peugeot 103 RCX or SPX moped.
The carburetor connection (Ø 24 mm) is designed for Dell'Orto PHBG carburetors. The 0.3 mm-thick diaphragm plate is made of Karbonit.
A quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Area of application | Tuning |
| Number of flaps | 4 pcs |
| Membrane material | Carbonite |
| Thick membrane platelets | 0.3 mm |
| Ø outside | 24 mm |
| Mounting type | Screws |
| Puch |
Explore categories from Carburetor & intake system
Moped fans also bought
Polini 43.5 mm cylinder kit reed | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 309.90
Not in stock
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Number of components: 1 pcs
CHF 2.40
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
GPO 43.5 mm cylinder head with O-ring, Polini Tuning new version | Puch
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Ø cylinder: 43.5 mm · Surface: sandblasted · Total length: 140 mm · Number of fixing points: 4 pcs · Width: 135 mm · Height: 55 mm · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
CHF 53.90
Polini CP 19 mm carburetor (hand choke)
Nominal diameter: 19 mm · Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nozzle size: 66 · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 73.5 mm · Ø Inside entrance: 19 mm · Width: 66 mm · Ø Output inside: 19 mm · Height: 135 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 42
CHF 139.90
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 399.90
Not in stock
Working late? Evening hours on Thursday until 20:00
