High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Total length | 940 mm |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Total length: 830 mm · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø outside: 95 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
CHF 184.90
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
CHF 294.90
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Ø outside: 88 mm · Total length: 900 mm · Mounting type: Tab · Color: gray · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
CHF 284.90
Not in stock
MOTIP heat-resistant paint black 400 ml
Temperature resistance (min.): 0 - 800 °C · Manufacturer: MOTIP · Contents: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Color: black · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
MOTIP heat-resistant clear lacquer (matt) 400 ml
Temperature resistance (min.): 0 - 800 °C · Manufacturer: MOTIP · Contents: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Color: transparent · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 24.90
CHF 62.25/l
AKOA Exhaust Streetpower "handmade" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Total length: 940 mm · Mounting type: Nuts · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Number of fixing points: 3 pcs
CHF 339.90
Not in stock
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
CHF 17.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Cable length: 2200 mm
CHF 2.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Cable length: 1600 mm
CHF 2.40
Airsal piston 46 mm | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 98 g
CHF 37.90
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Color: silver · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
CHF 12.90
Intake manifold Athena AJH Inox
Number of fixing points: 4 pcs · Ø inside: 21 mm · Manufacturer: Made in Netherlands · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Tuning · Mounting type: Screws · Total height: 60 mm · Ø External connection: 24 mm · Hole pattern [mm]: 60 x 40
CHF 82.90
Polini CP 21 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Total length: 71 mm · Mounting type: Rubber sleeve · Nominal diameter: 21 mm · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Width: 66 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 100 · Size of secondary nozzle: 40 · Height: 132 mm
CHF 139.90
Not in stock
Polini 43.5 mm cylinder kit reed valve with head | Puch
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 48 mm · Nominal diameter: 43.5 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Number of fixing points: 4 pcs · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning
CHF 399.90
Collection only possible with online purchase and appointment.
