
High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Mounting type | Nuts |
| Ø Flame tube outside | 30 mm |
| Number of fixing points | 3 pcs |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 95 mm · Number of fixing points: 1 pcs · Ø Internal connection: 23 mm · Ø Silencer: 60 mm · Flame tube attachment: Flange · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Total length: 830 mm
CHF 184.90
HOMOET exhaust "P6 Special" (longer center section) | Puch
Total length: 935 mm · Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø Silencer: 50 mm · Flame tube attachment: Flange · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone
CHF 294.90
Not in stock
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Number of fixing points: 2 pcs · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Total length: 900 mm
CHF 284.90
MOTIP heat-resistant paint black 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Contents: 400 ml · Color: black · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
CHF 62.25/l
MOTIP heat-resistant clear lacquer (matt) 400 ml
Temperature resistance (min.): 0 - 800 °C · Manufacturer: MOTIP · Area of application: Paint & varnish · Color: transparent · Contents: 400 ml · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 62.25/l
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
CHF 119.90
CHF 107.90









