One of the best clutches available for the Puch E50 engine.
Qualitatively very high quality.
Three different spring strengths are included for the corresponding application range, with the heaviest springs you can achieve a clutch engagement speed of approx. 5000 rpm
The low-wear copper linings provide the necessary grip.
Weight: 440 grams. Lightweight construction, ideal for any racing moped.
We recommend using the clutch only from 65 cc. For smaller cylinders, the centrifugal clutch tends to be too hard, which can lead to too much slippage.
We recommend rounding off the holes in the linings into which the springs are inserted.
This ensures that the springs are not damaged and will hold even under heavy loads.
Quality product from the American manufacturer Jammer Clutches.
Material | Steel |
Thickness | 19 mm |
Manufacturer | Jammer |
Material addition | Steel |
Recording type | Cone mounting |
Number of jaws | 3 pcs |
Ø outside | 92.5 mm |
Number of springs | 3 pcs |
Area of application | Racing, High End, Tuning, MX |
Puch | E50 |
Accessories & related products
Jammer clutch 1st gear | Tomos A35, A55
Material: Steel · Manufacturer: Jammer · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs · Tomos OEM number: 227849
CHF 189.90
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Area of application: Tuning
CHF 29.90
Moped fans also bought
swiing® revival screw set engine galvanized | Puch Maxi
Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
CHF 9.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Width: 47 mm · Height: 89 mm · Height: 109 mm · Manufacturer: swiing® ingenious parts · Total length: 65 mm · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Area of application: Tuning · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: Yes · Ø inside: 17 mm · Ø External connection: 23 mm · Total height: 53.5 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Height flange center hole: 42 mm · Hole spacing inlet: 38 mm
CHF 44.90
Rito crankshaft full cheeks with mounted bearings | Puch E50
Material: Steel · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Manufacturer: Rito · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Area of application: High End · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 10 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm
CHF 199.90