Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
Spring design | Tension spring |
Material | Spring steel |
Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
Manufacturer | Malossi |
Surface | varnished |
Color | white, yellow, red |
Total length | 32.6 mm |
Area of application | Tuning |
Puch | E50 |
Tomos |
Accessories & related products
Jammer racing clutch special 65 ccm and more | Puch E50
Material: Steel · Thickness: 19 mm · Manufacturer: Jammer · Ø outside: 92.5 mm · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
CHF 189.90
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Material: Steel · Manufacturer: Jammer · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs · Tomos OEM number: 227849
CHF 189.90
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Ø inside: 94 mm · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm
CHF 19.90
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 44 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
CHF 89.90
swiing® revival 12 mm carburetor (original) | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Total length: 65 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 108 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Nozzle size: 52 · Area of application: Standard · Clamping screw torque (max.): 4 N/m
CHF 69.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
swiing® ingenious pull starter | Puch E50 MVT ignition
Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Manufacturer: swiing® ingenious parts · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ignition system: MVT Allumage
CHF 149.90
Not in stock