Three clutch springs suitable for the Jammer racing clutch of your Puch Maxi S and N moped / moped with E50 engine.
These medium-strength springs for the centrifugal clutch change the clutch engagement behavior so that a higher speed is required until the clutch engages.
Note: We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
Other clutch spring sets and complete racing clutches can be found in the accessories section.
Quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Spring design | Tension spring |
| Material | Spring steel |
| Surface | varnished |
| Ø wire | 1.6 mm |
| Length spring hook | 10.8 mm |
| Leg length | 13.5 mm, 9.6 mm |
| Ø outside | 11 mm |
| Color | green |
| Ø inside | 7.4 mm |
| Total length | 37 mm |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
Jammer clutch 1st gear (aluminum carrier) | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
CHF 179.90
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
CHF 29.90
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: pink · Total length: 34 mm · Ø inside: 7.7 mm · Ø outside: 9.9 mm · Area of application: Tuning
CHF 11.90
Explore categories from Clutch
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Mounting type: Screws · Total length: 47 mm · Camouflaged: Yes · Area of application: Tuning
CHF 11.90
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Manufacturer: GPO · Material: Steel · Surface: blackened · Width across flats trigger: 27 mm · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 9.90
Handlebar fork plate 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Clamping diameter: 22 mm · Color: Chrome · Ø outside: 22 mm · Fork plate holder length: 90 mm · Length handlebar ends: 150 mm · Height: 350 mm · Crossbar: Yes · Mounting type: Fork plate · Ø Strut: 14 mm · Width: 720 mm · Strut length: 260 mm
CHF 33.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Material: Sealing paper · Manufacturer: swiing® revival parts · Color: sand-colored · Thickness: 1 mm · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: blue · Total length: 34 mm · Ø inside: 7.3 mm · Ø outside: 9.9 mm
CHF 11.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
