Replacement spring set for the Jammer tuning clutch on your Puch moped / moped with ZA50 engine and Tomos A35, A55 models.
These clutch springs can also be used for Fantic models with Minarelli V1 engine.
The pink clutch springs have a wire diameter of 1.1 mm.
With a wire diameter of 1.1 mm, the pink clutch springs are the heaviest of the available springs and are designated as stage 1.
The springs supplied with the jammer clutch are relatively hard, which means that a high engagement speed is required; this variant reduces the speed accordingly.
| Spring design | Tension spring |
| Length spring hook | 8 mm, 14 mm |
| Ø wire | 1.1 mm |
| Manufacturer | GPO |
| Material | Spring steel |
| Surface | varnished |
| Total length | 34 mm |
| Ø inside | 7.7 mm |
| Ø outside | 9.9 mm |
| Color | pink |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
| Tomos | |
| Fantic |
Accessories & related products
Jammer clutch springs medium racing clutch | Puch E50
Spring design: Tension spring · Length spring hook: 10.8 mm · Leg length: 9.6 mm · Leg length: 13.5 mm · Ø wire: 1.6 mm · Ø inside: 7.4 mm · Manufacturer: Jammer · Ø outside: 11 mm · Total length: 37 mm · Color: green · Material: Spring steel · Surface: varnished · Area of application: Tuning
CHF 13.90
Jammer clutch 1st gear (aluminum carrier) | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
CHF 179.90
Jammer clutch flange version | Minarelli V1
Manufacturer: Jammer · Material: Composite materials · Material: Steel · Recording type: 2-edge · Number of jaws: 3 pcs · Number of springs: 6 pcs · Ø outside: 82.5 mm · Thickness: 20.3 mm · Area of application: Racing · Area of application: Tuning
CHF 199.90
Jammer clutch cone version | Minarelli V1
Manufacturer: Jammer · Material: Composite materials · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 6 pcs · Ø outside: 82.5 mm · Thickness: 20.3 mm · Area of application: Racing · Area of application: Tuning
CHF 199.90
Not in stock
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Total length: 34 mm · Color: blue · Material: Spring steel · Surface: varnished · Ø inside: 7.3 mm · Ø outside: 9.9 mm
CHF 11.90
Hot 
Jammer clutch 1st gear "GPO-Edition" | Puch ZA50
Manufacturer: Jammer · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 15 pcs · Ø outside: 83.5 mm · Thickness: 12.8 mm · Area of application: Tuning · Alternative version of the Puch OEM number: 321.1.12.620.2
CHF 189.90
Explore categories from Clutch
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 12.50
Rectangular rear light (ULO replica) Budget
Width: 65 mm · Color: black · Color: red · Material: Plastic · Test mark: none · Bulb holder: BA9s · Number of fixing points: 1 pcs · Depth: 55 mm · Mounting type: Nuts & bolts · Brake light: No · Reflectors: Yes · Battery operated: No · Ø Receptacle: 3.5 mm · Pony OEM number: P777 · Puch OEM number: 321.1.55.100.0
CHF 9.50
swiing® revival gearbox cover gasket ZA50 engine | Puch Maxi S -2A, X30 NG - 2AH
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 175 mm · Width: 125 mm · Thickness: 0.3 mm · Number of fixing points: 6 pcs · Puch OEM number: 321.1.10.649.1
CHF 3.40
Polini main jet (74 - 115 of your choice) CP / Keihin / PWK carburetor
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Carburetor type: CP · Carburetor type: CP Evolution · Carburetor type: Keihin · Carburetor type: PWK · Carburetor type: RT-PWK · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 95 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 105 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 115 · Total length: 16.5 mm · Thread length: 3 mm · Drive: External hexagon · Width across flats: 6 mm
CHF 4.90
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Total length: 34 mm · Color: blue · Material: Spring steel · Surface: varnished · Ø inside: 7.3 mm · Ø outside: 9.9 mm
CHF 11.90
Hot
Jammer clutch 1st gear "GPO-Edition" | Puch ZA50
Manufacturer: Jammer · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 15 pcs · Ø outside: 83.5 mm · Thickness: 12.8 mm · Area of application: Tuning · Alternative version of the Puch OEM number: 321.1.12.620.2
CHF 189.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
