Hot 
Camouflaged 17 mm tuning intake bend suitable for Puch Maxi mopeds / mopeds which have an E50 engine installed.
The intake bend has been specially developed for use with the swiing ingenious 17 mm SRF carburetor with Ø 23 mm connection. In addition, the Puch logo and the 12 have been cast into the outside for optimum camouflage like the original.
With this combination, you get the full potential out of your engine and are still perfectly camouflaged from the outside.
Ø inside: 17 mm
Ø connection: 23 mm
Height (flange - center bore): 42 mm
Total height: 53.5 mm
Hole spacing: 38 mm
To ensure that the air filter fits perfectly on the frame, it is imperative that the 3 mm inlet gasket is used.
You can find the right carburetor, air filter, gasket and a complete set for your Maxi in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Area of application | Tuning, Racing, Performance |
| Material | Aluminum |
| Ø inside | 17 mm |
| Ø External connection | 23 mm |
| Number of fixing points | 2 pcs |
| Total height | 53.5 mm |
| Height flange center hole | 42 mm |
| Total length | 38 mm |
| Camouflaged | Yes |
| Mounting type | Stud bolts & nuts |
| Hole spacing inlet | 38 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: Yes · Nozzle size: 62 · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m
CHF 104.90
swiing® revival nozzle M3.5 (41 - 120 of your choice) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100
CHF 3.90
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Material: Plastic · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Color: black · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Area of application: Standard · Area of application: Tuning · Camouflaged: Yes
CHF 24.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle block: 2.2 · Width: 47 mm · Height: 89 mm · Height: 109 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 65 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Total length: 64.8 mm · Width: 47 mm · Height: 89 mm · Height: 110 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle block: 2.2 · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Clamping screw torque (max.): 3 N/m
CHF 119.90
swiing® revival 4 mm intake gasket 17 mm intake manifold square | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (known as Bakelite®) · Thickness: 4 mm · Nominal diameter: 17 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
CHF 7.50
Moped fans like you also bought:
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86
CHF 15.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle block: 2.2 · Width: 47 mm · Height: 89 mm · Height: 109 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 65 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
Collection only possible with online purchase and appointment.
