Electronic ignition system with alternator compatible with your Puch 1-speed moped equipped with an E50 engine.
This magneto ignition system is designed for clockwise-rotating engines. The system is contactless and low-maintenance, as it uses neither a breaker nor a capacitor. The integrated, fully electronic ignition ensures a stable spark and can significantly improve starting performance and combustion compared to an older breaker ignition system.
The lighting output is 12 V / 100 W DC. This makes the system suitable for brighter lighting as well as for powering the battery, turn signals, and standard horn.
Scope of delivery:
• Rotor
•, pre-assembled stator unit
•, ignition coil with ignition cable
•, regulator/rectifier
•, blue cut-off cable
•, small parts
Notes:
The matching rotor puller (M27x1.25 / M12) is not included.
The charging system is designed for rechargeable 12 V lead-acid, AGM, or gel batteries. Detailed installation instructions are included.
You can find the matching pole puller, spark plug connectors, spark plugs, an ignition timing gauge, and an ignition timing adjustment tool among the accessories.
A quality product from the Czech manufacturer Vape.
Alternative to the original Puch part number: 349.1.50.000.0, 349.2.50.000.0
| Manufacturer | VAPE |
| Material | Metal, Plastic |
| Light coil voltage | 12 V |
| Weight | 1650 g |
| Direction of rotation | right |
| Ø mounting plate | 90 mm |
| Ø Internal flywheel | 87.3 mm |
| Number of fixing points | 7 pcs |
| Tension | 12 V |
| Ø Flywheel outside | 103.7 mm |
| Performance | 100 W |
| Ø cable | 7 mm |
| Area of application | Tuning, Road use |
| Mounting type | Nuts & bolts |
| Alternative version of the Puch OEM number | 349.1.50.000.0, 349.2.50.000.0 |
| Puch | E50 |
Accessories & related products
Buzzetti flywheel trigger combination M26x1.5 / M27x1.25
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: Buzzetti · Material: Steel · Surface: galvanized (blue) · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
CHF 19.90
swiing® revival ignition plate 90 mm Bosch / DUCATI
Manufacturer: swiing® revival parts · Material: Aluminum · Ø inside: 18.5 mm · Ø outside: 90 mm · Ø bolt circle: 80 mm · Number of cables: 3 pcs · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
CHF 109.90
Hot 
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
CHF 269.90
Moped fans also bought
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Ø outside: 130 mm · Width: 150 mm · Height: 80 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 138 mm · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Number of fixing points: 2 pcs · Total length: 170 mm
CHF 149.90
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Ø outside: 130 mm · Total length: 160 mm · Color: Chrome · Color: black-matt · Height: 88 mm · Width: 150 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
CHF 149.90
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Diameter: 24 mm · Diameter: 40.3 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool · Total length: 120 mm · Number of components: 1 pcs
CHF 43.90
GPO ignition plate 6 / 12V CDI ignition
Ø inside: 18.5 mm · Ø outside: 90 mm · Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Ø Internal flywheel: 90 mm · Number of cables: 2 pcs · Tension: 6 V · Tension: 12 V · Cable length: 580 mm · Area of application: Performance · Area of application: Standard
CHF 89.90
Polini cylinder head for 38.4 - 43 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Material: Aluminum · Ø cylinder: 38.4 - 43 mm · Camouflaged: No · Candle thread: long · Decompressor: Yes · Total length: 118 mm · Width: 85 mm · Height: 58 mm · Area of application: Tuning
CHF 54.90
Working late? Evening hours on Thursday until 20:00
