Hot 
Adjustable premium gas pressure shock absorbers in black with adjustable coil spring for your moped, moped and small motorcycle.
The high-end dampers are mainly used in the cross sector and impress with their optimum adjustability. The response behavior can be easily adjusted with just a few clicks. The height or preload of the springs can be infinitely adjusted by up to 60 mm using a thread. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 330 mm
Ø outer spiral spring: 61 mm
Ø expansion joint: 52 mm
Ø bushings for fastening: 10 mm
Color: black / red
The scope of delivery corresponds to one pair.
Simpler rear springs as well as the washers and fastening material can be found under accessories.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Aluminum, Steel, Chrome steel (colloquially known as stainless steel) |
| Surface | anodized |
| Damping type | Pneumatic (air) |
| Ø outside | 61 mm |
| Adjustable | Yes |
| Total length | 340 mm |
| Ø Fastening inside | 10 mm |
| Hole spacing | 330 mm |
| Number of fixing points | 2 pcs |
| Color | black, red |
| Mounting type | Nuts & bolts |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Color: blue · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs · Screw head: Hexagon
CHF 17.90
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Color: black · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 340 mm · Number of fixing points: 2 pcs
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Side stand black | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Total length: 340 mm · Number of fixing points: 2 pcs · Mounting type: Screwed clamp · Color: black
CHF 19.90
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Material: Chrome steel (colloquially known as stainless steel) · Manufacturer: GPO · Surface: raw · Nipple length: 14 mm · Quantity: 36 pcs · Length from hook: 188 mm · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Color: silver · Hook length: 9 mm · Hook angle: 95 ° · Thread length: 11 mm
CHF 54.90
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø outside: 35 mm · Ø inside: 15 mm · Width: 8 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Material: Steel · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 25.6 mm · Bearing clearance: CN (standard) · Stock number: E15 · Area of application: High End · Area of application: Standard · Bearing type: Deep groove ball bearing · Ø outside: 35 mm · Ø inside: 15 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Width: 8 mm · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Thread type: MF10x1.25 (fine pitch thread) · Mounting type: Screws · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm
CHF 23.90
Collection only possible with online purchase and appointment.
