Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Ø outside | 46 mm |
| Manufacturer | MKX |
| Hole spacing | 340 mm |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 24 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 8 mm, 10 mm |
| Total length | 375 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 35 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Total length: 380 mm · Mounting type: Nuts & bolts · Hole spacing: 350 mm · Number of fixing points: 2 pcs
CHF 129.90
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
CHF 11.90
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
CHF 17.90
MKX shock absorber 34 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 370 mm · Mounting type: Nuts & bolts · Hole spacing: 340 mm · Number of fixing points: 2 pcs
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
Spotlight round Ø 13 cm chrome / black
Ø outside: 130 mm · Area of application: Standard · Test mark: none · Material: Sheet metal (steel) · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Color: Chrome · Lens material: Plastic · Color: black · Color: transparent · Width: 134 mm · Bulb holder: BA15d · Height: 147 mm · Depth: 80 mm · Speedometer recording: None · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Thread size: M6 · Mounting type: Screws
CHF 24.90
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 16 - 17 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853
CHF 10.50
Magura adjusting screw brake short
Drive: Knurled screw · Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 15 mm · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Shank length: 6.9 mm · Ø shaft: 6.1 mm · Color: silver · Magura OEM number: 315 390
CHF 3.40
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
CHF 12.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
CHF 18.90
Hot
Inner cable set automatic | Puch E50
Total length: 1600 mm · Total length: 2200 mm · Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
Working late? Evening hours on Thursday until 20:00
