For: Sachs

28363

swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)

  • − 10% from 10 pieces

    CHF 44.90 per unit

CHF 49.90

Incl. VAT, plus shipping costs

in stock

In stock

World first! «Finally a clutch basket bearing for Sachs that I can install with a clear conscience!» Quote Chrigi, passionate Sachs mechanic for 20 years.

Ball bearing for countershaft for manually shifted Sachs mopeds / mopeds with engines of the 50/2, 50/3, 50/4, 503 2AL, 2BL series

The conical bearing impresses with its perfect and flawless quality. Special attention was paid to the following points: 

  • Bearing play: As it should be, the bearing has slight play when removed; when pressed in, the play is reduced to a minimum
  • Ball raceway: In contrast to original or reproduction bearings, the ball raceway has raised shoulders, which gives the bearing additional stability for axial forces, for example with reinforced clutch springs (swiing springs or Panzer springs)
  • Smooth running: The raceway of the balls is absolutely smooth and guarantees «chatter-free» noiseless running
  • Perfect concentricity: No more oblique bores that cause the bearing to run out of round
  • Cleanly ground and matching cone

Installation tips: 

  • To ensure that the clutch basket does not have too much play, it is important that the bearing sleeve on the countershaft and the bearing bushes for the countershaft in the housing are not worn. These can be found under accessories.
  • Axial play of the countershaft: 0.05-0.10 mm
  • Tightening torque of the clutch basket nut (M20.8x1): 22 Nm
  • Heat the housing to 80 °C, so the bearing can be placed in the housing and shrunk in without pressing

Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: A2531

Details

Bearing cage"-" Sheet steel cage ball-guided
Stock numberE15
Inner ring width25.6 mm
Manufacturerswiing® revival parts
Bearing clearanceCN (standard)
MaterialSteel
Ø inside15 mm
Bearing typeDeep groove ball bearing
Width8 mm
Thread typeMF20.8x1 LH (fine/left-hand thread)
Ø outside35 mm
Area of applicationStandard, High End
Pony spare part no.A2531
Sachs spare part no.0286 079 105

Suitable for the following models

Sachs

50 (Fahrtwind, 1.25 / 1.5 PS, DE)

50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS)

50/3

50/4 - MLFB (2.6 PS), LKH (4.5 PS)

503 - 2AL / 2BL

Accessories & related products

Moped fans like you also bought: