Black, adjustable shock absorbers with neon yellow coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Color | neon yellow, black |
| Damping type | Spring |
| Ø outside | 50 mm |
| Adjustable | Yes |
| Surface | varnished |
| Ø spars | 30 mm |
| Total length | 375 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Hole spacing | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 35 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Total length: 380 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 350 mm
CHF 129.90
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm
CHF 11.90
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread)
CHF 17.90
MKX shock absorber 34 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 370 mm · Mounting type: Nuts & bolts · Hole spacing: 340 mm · Number of fixing points: 2 pcs
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
GUIA spotlight angular 18 cm black
Manufacturer: GUIA · Housing material: Sheet metal (steel) · Surface: varnished · Lens material: Glass · Switch included: No · Color: black · Tension: 6 V · Tension: 12 V · Bulb holder: BA20d · Speedometer recording: None · Width: 180 mm · Thread size: M8 · Depth: 110 mm · Height: 150 mm · Battery operated: No · Test mark: none · Mounting type: Screws · Number of fixing points: 2 pcs
CHF 57.90
Working late? Evening hours on Thursday until 20:00
