Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting if lateral forces occur.
Length (mount – mount): 340 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
| Total length | 370 mm |
| Ø outside | 52 mm |
| Manufacturer | YSS |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Damping type | Hydraulic (oil) |
| Adjustable | Yes |
| Ø spars | 32 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm, 12 mm |
| Hole spacing | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
CHF 11.90
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
CHF 17.90
Shock absorber 34 cm fancy neon yellow
Surface: varnished · Color: black · Color: neon yellow · Damping type: Spring · Ø outside: 50 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 30 mm · Hole spacing: 340 mm · Mounting type: Nuts & bolts · Total length: 375 mm
CHF 79.90
CHF 64.90
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Color: black · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Hole spacing: 340 mm · Mounting type: Nuts & bolts · Total length: 375 mm
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø inside: 25.5 mm · Ø outside: 30 mm · Length spring hook: 50 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Material: Spring steel · Surface: galvanized (blue) · Total length: 125 mm · Area of application: Original · Area of application: Standard
CHF 4.90
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Thread length: 7 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Area of application: Standard
CHF 2.50
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
CHF 1.80
NGK CR4 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Ø cable: 7 mm · Manufacturer: NGK · Material: Silicone · Cable length: 500 mm · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Color: red · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector
CHF 32.90
Working late? Evening hours on Thursday until 20:00
