Zinc-plated nose spring for adjusting the brake lever on your Puch Maxi S, N moped / moped.
The brake lever adjustment spring is mounted on the rear brake anchor plate.
Ø wire: 2.35 mm
Ø inside 25.5 mm
Material: steel, galvanized
You can find the brake anchor plate and matching brake pads in the accessories section.
| Spring design | Torsion spring, Nose feather |
| Length spring hook | 50 mm |
| Leg length | 45 mm |
| Ø wire | 2.4 mm |
| Material | Spring steel |
| Surface | galvanized (blue) |
| Ø inside | 25.5 mm |
| Total length | 125 mm |
| Ø outside | 30 mm |
| Area of application | Original, Standard |
| Puch |
Ratings
Accessories & related products
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø axle: 12 mm · Ø shaft: 10 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Total length: 187 mm · Ø screw holder: 6.5 mm · Ø bore: 12.2 mm · Cranking (offset): 8 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Ø outside: 91 mm
CHF 69.90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 135 mm · Ø shaft: 10 mm · Ø axle: 12 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø outside: 92 mm · Ø screw holder: 6.5 mm · Cranking (offset): 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm
CHF 74.90
Explore categories from Drum brake
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm
CHF 2.50
CHF 2.20
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
CHF 9.90
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Ø shaft: 11.9 mm · Material: Steel · Surface: galvanized (blue) · Ø outside: 11.8 mm · Total length: 185 mm · Shank length: 100 mm · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 26 mm · Thread length: 52.5 mm
CHF 14.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø axle: 12 mm · Ø shaft: 10 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Total length: 187 mm · Ø screw holder: 6.5 mm · Ø bore: 12.2 mm · Cranking (offset): 8 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Ø outside: 91 mm
CHF 69.90
Collection only possible with online purchase and appointment.
