Hot 
High-quality Ø 80x18 mm brake pads with return springs for the front and rear drum brakes on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect.
Alternative brake pads, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Ø drum | 80 mm |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Number of springs | 2 pcs |
| Slotted | Yes |
| Width | 18 mm |
| Color | silver |
| Area of application | Racing |
Accessories & related products
Eurol copper grease 100 g
Temperature resistance (min.): -40 - 1100 °C · Manufacturer: Eurol · Contents: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Fat
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Contents: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Cleaner
CHF 24.90
CHF 33.20/l
Explore categories from Drum brake
Moped fans also bought
Hot
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Color: black · Surface: powder-coated · Material: Steel · Ø mounting hole: 6.7 mm · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
CHF 24.90
Not in stock
Hot
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
CHF 14.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: gray · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4.05 mm · Ø Pin: 4 mm
CHF 18.90
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Color: gray · Number of components: 24 pcs · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Thread length: 22 mm · Screw head: Hexagon · Shank: No · Width across flats: 10 mm
CHF 12.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
Not so nice 
Cast wheel hub | Puch Maxi, X30 NG-2AH
Thread type: FG34.8 (1.37" 24G) · Color: silver · Ø drum: 80 mm · Material: Aluminum · Ø mounting hole: 6.1 mm · Ø axle: 12 mm · Thread length: 12 mm · Total length: 105 mm · Ø inside: 27.9 mm · Ø outside: 114.7 mm · Number of fixing points: 12 pcs · Area of application: Tuning · Ø bolt circle: 105 mm
CHF 89.90
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Material: Steel · Ø External brake pads: 80 mm · Ø axle: 12 mm · Total length: 187 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Wide cam holder: 12 mm · Ø outside: 91 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm · Ø screw holder: 6.5 mm
CHF 69.90
Not in stock
Working late? Evening hours on Thursday until 20:00
