
High-quality Ø 80x18 mm brake pads with return spring for the front and rear drum brake on your Puch Maxi moped / moped.
These pads have a strong braking effect and are therefore mainly used in racing.
Alternative brake pads, matching springs and the corresponding cleaning agents and lubricants can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
Original Puch spare part number: 349.1.40.015.0 & 349.1.40.019.1
| Manufacturer | Polini |
| Ø drum | 80 mm |
| Width | 18 mm |
| Number of springs | 2 pcs |
| Color | silver |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Slotted | No |
| Area of application | Tuning |
| Puch |
Accessories & related products
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -40 - 1100 °C
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Cleaner · Contents: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
Explore categories from Drum brake
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
CHF 9.90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Total length: 187 mm · Brake lever length (lever length): 55 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm
CHF 69.90






