Chrome-plated racing exhaust with attached silencer suitable for various Puch mopeds / mopeds with a straight outlet.
This tuning exhaust delivers plenty of power and is also visually stunning.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery.
These can be replaced. This changes the exhaust back pressure and therefore the performance of the silencer.
This gives you an exhaust for the lower, middle and upper speed range all in one.
You can find more racing pipes in the accessories section.
Branded product from the Portuguese manufacturer TECNO.
| Manufacturer | TECNO |
| Material | Steel, Aluminum |
| Surface | chrome-plated |
| Total length | 900 mm |
| Color | Chrome |
| Ø Silencer | 60 mm |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 24 mm |
| Exhaust type | Cone / double cone |
| Puch |
Ratings
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Place of use: Exhaust · Thickness: 3 mm · Ø screw holder: 6.6 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
CHF 7.40
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Total length: 900 mm · Mounting type: Tab · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone
CHF 284.90
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Color: Chrome · Color: black-matt · Number of fixing points: 2 pcs · Ø outside: 130 mm · Width: 150 mm · Height: 88 mm · Hole spacing: 137.5 mm
CHF 149.90
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Inventory-managed: No · Manufacturer: Road Master · Tire width: 2.25 " · Color: black · Width: 2 1/4 " · Wheel size: 17 " · Old designation: 21 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4 P.R. · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
CHF 32.50
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Drive: Outer edge · Width across flats: 13 mm · Width across flats: 17 mm · Ø External head: 14 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 3 pcs · Ø shaft: 9.8 mm · Shank: Yes · Thread length: 13 mm · Thread type: MF10x1 (fine pitch thread) · Shank length: 9.5 mm · Total length: 32 mm · Area of application: Standard
CHF 12.90
Hot
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 19 mm · Number of springs: 3 pcs · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
CHF 189.90
Not in stock
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø fuel hose connection: 6 mm · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Width: 50 mm · Ø Output inside: 15 mm · Height: 95 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
CHF 79.90
Hot
swiing® revival 12 mm carburetor "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Nominal diameter: 12 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Total length: 65 mm · Width: 50 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
CHF 69.90
Collection only possible with online purchase and appointment.
