Short version of the bolt for holding the support plate (brake anchor plate) made of stainless steel for your Puch Maxi S, N, S-2A / Supermaxi LG1, LG2 mopeds
Including M10x1 nut and matching washer.
Total length: 32 mm
Ø bolt: 9.8 mm
Thread: M10
The M10x1 nut and a matching washer for the stud are included in the scope of delivery.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 349.1.41.008.1
| Material | Chrome steel (colloquially known as stainless steel) |
| Total length | 32 mm |
| Manufacturer | swiing® revival parts |
| Ø shaft | 9.8 mm |
| Nominal diameter (thread) | 10 mm |
| Ø External head | 14 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Thread length | 13 mm |
| Drive | Outer edge |
| Shank | Yes |
| Shank length | 9.5 mm |
| Width across flats | 13 mm, 17 mm |
| Number of components | 3 pcs |
| Area of application | Standard |
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Total length: 187 mm · Ø shaft: 10 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
CHF 69.90
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Total length: 135 mm · Manufacturer: swiing® revival parts · Ø outside: 92 mm · Ø axle: 12 mm · Surface: galvanized (blue) · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Ø shaft: 10 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
CHF 74.90
Explore categories from Drum brake
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Thread type: MF12x1 (fine pitch thread) · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Hot
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Installation direction: horizontal / horizontal · Thread type: MF12x1 (fine pitch thread) · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Total length: 135 mm · Manufacturer: swiing® revival parts · Ø outside: 92 mm · Ø axle: 12 mm · Surface: galvanized (blue) · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Ø shaft: 10 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
CHF 74.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
