profile
All wishlists Community wishlists
Hot Hot
Carousel Image 1
Carousel Image 2
logo_swiing ingenious parts

For: Puch

17984

swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch

rating iconrating iconrating iconrating iconrating icon
No reviews
CHF 38.90

Incl. 8.1% VAT.

Description

Wheel axle with closed groove ball bearings (Ø 29 mm) for the rear spoke wheel on your Puch moped / moped.

The rear wheel axle includes all required washers, nuts and spacers.
The dimension of the long spacer is 78.5 mm.

  • green cable tie: brake anchor plate
  • Blue cable tie: swingarm
  • Red cable tie: wheel hub

Note: When mounting the ball bearings, make sure that the long spacer bush is clamped between the two bearings without any play. This is the only way to ensure that the inner rings of the bearings press correctly onto the bushing. If this is not observed, the bearings will inevitably become distorted.

Manufacturerswiing® ingenious parts
Ball bearing closedYes
MaterialSteel
Surfacegalvanized (blue)
Diameter29 mm
Ø shaft19 mm
Ø inside12 mm
Shank length100 mm
Thread typeMF12x1 (fine pitch thread)
Thread length29 mm, 53 mm
Total length190 mm
Ø outside29 mm
Width across flats19 mm
Puch

Accessories & related products

Nut M12x1 x 10 SW19 Wheel nut galvanized

For: Universal · Puch · Sachs

10422

Nut M12x1 x 10 SW19 Wheel nut galvanized

Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Height: 10 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 19 mm · Strength class: 8 · Thread depth: 10 mm · Area of application: Standard

CHF 2.00

Hot Hot
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
undefined

For: Puch

17081

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 35.7 mm · Shank length: 74.5 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Width across flats: 19 mm · Ø outside: 29.02 mm

CHF 38.90

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
undefined

For: Universal · Puch

22374

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi

Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Plastic · Material: Steel · Bearing type: Deep groove ball bearing · Width: 9 mm · Ø inside: 12 mm · Ø outside: 29.02 mm

CHF 8.90

Inox
Nut M12x1 x 7 SW19 Wheel nut Inox

For: Universal · Puch · Sachs

25403

Nut M12x1 x 7 SW19 Wheel nut Inox

Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Height: 7 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 19 mm

CHF 2.80

swiing® revival wheel nut M12x1 x 4 SW17 galvanized
undefined

For: Universal · Puch · Sachs · Tomos

26324

swiing® revival wheel nut M12x1 x 4 SW17 galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Height: 4 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 17 mm · Strength class: 8

CHF 2.90

swiing® revival spacer sleeve wheel axle 12.3x19x78.5 mm
undefined

Universal

26625

swiing® revival spacer sleeve wheel axle 12.3x19x78.5 mm

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.3 mm · Nominal diameter inside: 12 mm · Total length: 78.5 mm · Ø outside: 19 mm

CHF 6.90

swiing® revival spacer sleeve wheel axle 12.3x23x12 mm
undefined

Universal

26626

swiing® revival spacer sleeve wheel axle 12.3x23x12 mm

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.3 mm · Nominal diameter inside: 12 mm · Total length: 12 mm · Ø outside: 23 mm

CHF 5.90

Inox
66HEROES pointed nut "Spike" M5 - M12 Inox
undefined
angle-right

Universal

26340

66HEROES pointed nut "Spike" M12 Inox

Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon

CHF 6.90

Explore categories from Hub & axle

S-20-50-030-10_Achse
Axis
S-20-50-030-15_Lagerung
Storage
S-20-50-030-20_Distanzhuelsen
Spacer sleeves
S-20-50-030-30_Freilauf
Freewheel
S-20-50-030-40_Muttern
Nuts
S-20-50-030-50_Nabenkoerper
Hub shell
S-20-50-030-60_Radspanner
Wheel tensioner
S-20-50-030-70_Schrauben-Sicherung
Screws & fuse

Moped fans also bought

Hot Hot
GPO control bearing set M26x1 | Puch
undefined

For: Puch

10077

GPO control bearing set M26x1 | Puch

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Bearing type: Bearing ring · Color: silver · Ø inside: 26.8 mm · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Ø outside: 41 mm

CHF 11.90

Hot Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
undefined

Universal

10181

Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom

Manufacturer: GPO · Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm

CHF 9.90

Not in stock

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

CHF 10.90

CHF 24.22/l

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10371

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube

Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 - 17 " · Wheel size: 17 " · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve

CHF 10.50

Rim tape blue 17" (protection for inner tube)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10994

Rim tape blue 17" (protection for inner tube)

Manufacturer: Made in Germany · Material: Rubber · Color: blue · Width: 23 mm · Wheel size: 17 " · Total length: 1280 mm

CHF 3.50

Hot Hot
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
undefined

For: Puch

17081

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 35.7 mm · Shank length: 74.5 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Width across flats: 19 mm · Ø outside: 29.02 mm

CHF 38.90

Hot Hot
Inner cable set automatic | Puch E50
undefined

For: Puch

18185

Inner cable set automatic | Puch E50

Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm

CHF 9.90

Hot Hot
Polini brake shoes Ø 80 x 18 | Puch Maxi
undefined

For: Puch

21718

Polini brake shoes Ø 80 x 18 | Puch Maxi

Slotted: No · Manufacturer: Polini · Ø drum: 80 mm · Springs included: Yes · Color: silver · Width: 18 mm · Ø locating bolt: 10 mm · Number of springs: 2 pcs · Area of application: Tuning

CHF 19.90

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
undefined

For: Puch

30386

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch

Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 34.5 mm · Shank length: 74.5 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Width across flats: 19 mm · Ø outside: 29.02 mm

CHF 38.90