Steel protective sleeve with an M10 x 1 mm thread to protect thread ends, e.g. on the crankshaft, when pressing on them with a puller.
Dimensions of the centering sleeves:
Internal thread: MF10 x 1 mm
Ø external: 14 mm
Total length: 25 mm
Thread depth: 10 mm
Material: Steel, galvanized
You can find the matching puller and other parts in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Clamping depth | 10 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Special tool |
| Diameter | 14 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Number of components | 1 pcs |
| Total length | 25 mm |
Ratings
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool
CHF 43.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Number of components: 2 pcs · Area of application: (Dis)assembly tool
CHF 17.90
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs · Area of application: Special tool
CHF 39.90
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Width: 105 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Total length: 145 mm · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts
CHF 10.90
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Color: black · Color: red · Tension: 6 V · Ø Receptacle: 4 mm · Width: 60 mm · Height: 110 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Number of fixing points: 2 pcs · Depth: 80 mm · Mounting type: Nuts & bolts
CHF 36.50
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Nominal diameter: 38 mm · Manufacturer: Meteor · Thick piston ring: 1.6 mm · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Weight piston kit: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005
CHF 49.90
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
CHF 5.40
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
swiing® ingenious thread protection bushing M16x1.5
Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 22 mm · Thread type: MF16x1.5 (fine pitch thread) · Total length: 55 mm · Number of components: 1 pcs · Area of application: Special tool
CHF 15.90
swiing® ingenious thread protection bushing M8
Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Thread type: M8x1.25 (standard thread) · Total length: 23 mm · Number of components: 1 pcs · Area of application: Special tool
CHF 6.90
swiing® ingenious thread protection bushing M12x1.25
Width across flats trigger: 13 mm · Width across flats Screw: 13 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 15 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 16 mm · Thread type: MF12x1.25 (fine pitch thread) · Total length: 25 mm · Number of components: 1 pcs · Area of application: Special tool
CHF 10.90
Collection only possible with online purchase and appointment.
