This paint set is the original gold bronze transparent paint used by Puch.
The golden glaze therefore corresponds 100% to the original color.
The set contains 400 ml silver base (reproduced using the original sample) and 400 ml gold bronze glaze. The mixing ratio of both products is 1:1 and each results in 0.8 l ready to use.
It is essential to use two-coat thinner (BC thinner / basecoat thinner).
After the moped parts have been prepared as usual, they are painted with the silver primer to cover them. After a flash-off time of approx. 30 minutes, two even coats of gold bronze are applied. As the amount of glaze applied can change the color tone, it is recommended to create a color sample in advance and then paint the moped in the same system!
Painting with two-component clear coat after a drying time of another 30 minutes is mandatory. However, this is not included in the set.
| Manufacturer | Puch |
| Color | goldbronze |
| Contents | 800 ml |
| Puch |
Ratings
Accessories & related products
Explore categories from Paints & varnishes
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Total length: 55 mm · Total length: 75 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Width across flats Screw: 19 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Number of components: 1 pcs
CHF 9.90
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Wheel size: 16 - 17 " · Wheel size: 17 "
CHF 10.50
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut · Height: 10 mm · Strength class: 8 · Thread depth: 10 mm · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Width across flats: 19 mm
CHF 2.00
Presto Nitro Universal Thinner 500 ml
Manufacturer: Presto · Contents: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: Highly flammable liquid and vapor · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause damage to organs through prolonged or repeated exposure · Hazard warning: May cause drowsiness and dizziness · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health · Area of application: Workshop accessories
CHF 12.90
CHF 25.80/l
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
