
This paint set is a remix of the original copper paint used by Puch (original color number P6801T).
The copper-orange glaze corresponds 100% to the original color.
The set contains 400 ml silver base (reproduced using the original sample) and 400 ml copper-orange (glaze), the mixing ratio of the glaze is 1:1 and results in 0.8 l ready to spray.
The mixing ratio of the silver base is also 1:1.8 l ready to spray.
The mixing ratio for the silver primer is also 1:1.
It is essential to use two-coat thinner (BC thinner / basecoat thinner).
After the moped parts have been prepared as usual, they are painted with the silver primer to cover them. After a flash-off time of approx. 30 minutes, apply two or three even coats (depending on the thickness of the coat) of the copper orange glaze. As the amount of glaze applied can change the color tone, it is recommended to create a color sample in advance and then paint the moped using the same system!
Painting with 2-component clearcoat after another 30 minutes is mandatory. However, this is not included in the set.
| Manufacturer | Puch |
| Color | copper-colored, orange |
| Contents | 800 ml |
| Puch |
Accessories & related products
Explore categories from Paints & varnishes
Moped fans also bought
swiing® revival 17" rear fender Inox | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Wheel size: 17 " · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm
CHF 37.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
CHF 19.90
Tank sticker "PUCH maxi S" 204 x 29 | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Color: Chrome · Color: black · Color: green · Color: white · Width: 204 mm · Height: 29 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Border: Chrome surround · Puch OEM number: 349.2.20.537.0
CHF 8.50



