
Non-spark plug connector made of hard plastic for your moped, moped and small motorcycle.
The spark plug lead is pushed into the guide. The pointed spike, which is made of brass, is screwed into the spark plug hole and thus secures the ignition cable and establishes contact.
Since the ignition plug has an M4 mounting thread, the end cap on the ignition plug must be removed.
Cables with a maximum diameter of 7 mm can be used.
When using an electronic ignition system (HPI, PVL, Selettra, etc.), a de-stemmed spark plug cap should be used.
Matching spark plugs, spark plug cables and alternative spark plug plugs can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Plastic |
| Ø cable | 5 mm, 7 mm |
| Color | black |
| Spark plug socket | M4 |
| Cable available | No |
| Suppressed | No |
| Subcategory | Spark plug connector |
Accessories & related products
BERU spark plug connector 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Resistance: 1000 Ω · Subcategory: Spark plug connector · Suppressed: Yes · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
CHF 7.90
Moped fans also bought
Karcoma fuel filter plastic small
Ø inside: 3 mm · Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Filter type: Plastic net · demountable: No · Ø outside: 20 mm · Total length: 23.4 mm · Total length: 50 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
CHF 5.80
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Ø inside: 15 mm · Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Ø outside: 35 mm · Area of application: Standard · Width: 8 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
NewFren clutch plates | Sachs 50/2, 503 2AL/2BL (A3887)
Thickness: 3.3 mm · Manufacturer: NewFren · Material: Composite materials · Area of application: Standard · Material: Steel · Recording type: Interlocking · Ø inside: 30 mm · Ø inside: 36 mm · Ø outside: 93.8 mm · Number of slats: 2 pcs · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
CHF 28.90
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.4 mm · Total length: 210 mm · Width: 130 mm · Number of components: 1 pcs · Number of fixing points: 5 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
CHF 5.90
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Ø inside: 86 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.4 mm · Total length: 250 mm · Width: 170 mm · Number of components: 1 pcs · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
CHF 5.90
Oil seal FPM 15/30/7 B DUO | Sachs 50/2, 503
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: FPM / FKM (colloquially known as Viton) · Width: 7 mm · Ø inside: 15 mm · Temperature resistance (min.): -30 - 200 °C · Ø outside: 30.1 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
CHF 7.90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Stock number: E15 · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90








