Hot 
The legend is now back even bigger! The legendary Metrakit racing cylinder from days gone by has risen from the ashes like a phoenix in the 45 mm version and ignites a new fire in your Puch Maxi S, N, X30 Sport NS, NL and Supermaxi LG1 and LG2 mopeds.
The aluminium cylinder with grey cast iron liner is an optimized replica of the original Metrakit racing cylinder. The timing has been revised compared to the original and provided with more advance, making the well-known piston sticking problem due to high heat development a thing of the past. In addition, the cylinder height has been precisely adapted so that the extra-thick base gasket previously required is now superfluous.
This GPO racing cylinder is one of the strongest and most powerful in its class and has been extensively tested. It impresses with ample torque across the entire power band and offers an impressively powerful performance. Thanks to the optimizations compared to the original, the cylinder also achieves a noticeably higher engine speed, which ensures even more power and driving pleasure.
To get the full power out of this tuning cylinder, we recommend at least a 15 mm carburetor. However, you can achieve significantly more power with a 17 mm carburetor. Thanks to the generous 19 mm intake, you have sufficient scope for optimum power delivery.
Manufacturer: GPO · Nominal diameter: 45 mm · Material: Aluminum · Ø outside piston (A): 44.93 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring, L-ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm, 2 mm · Thick piston ring: 1.8 mm, 1.9 mm · Weight piston kit: 98 g
Manufacturer: GPO · Material: Sealing carton, Aluminum, Graphite / Graphite · Number of components: 4 pcs · Thickness: 0.4 mm, 0.5 mm, 2.6 mm · Ø cylinder: 43.5 mm, 45 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9 · Nominal diameter (thread): 6 mm
| Manufacturer | GPO |
| Material | Aluminum, Gray cast iron |
| Surface | varnished |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 26 mm |
| Camouflaged | No |
| Ø Inlet inside | 19 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Area of application | Tuning, Racing |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 104.90
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Weight: 968 g · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Ø piston pin (B): 12 mm · Thread length: 15 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
CHF 179.90
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Ø outside: 70 mm · Flame tube attachment: Flange
CHF 119.90
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Hole spacing inlet: 38 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Total height: 53.5 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Height flange center hole: 42 mm · Total length: 38 mm
CHF 44.90
HOMOET Exhaust "RS Cigar" 28 mm Black | Puch Maxi, X30
Total length: 920 mm · Manufacturer: HOMOET · Material: Steel · Surface: powder-coated · Color: black · Ø Internal connection: 24.5 mm · Mounting type: Welded lug · Number of fixing points: 3 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Flame tube attachment: Nuts & bolts
CHF 154.90
Hot
GPO 21 mm intake manifold Dell'Orto PHBG | Puch E50 / Z50 / ZA50 (wind cooled) / ZA50 (Cat.)
Manufacturer: GPO · Material: Aluminum · Ø inside: 21 mm · Hole spacing inlet: 38 mm · Ø External connection: 26 mm · Area of application: Racing · Area of application: Tuning · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Total height: 68.6 mm · Total length: 85.5 mm
CHF 34.50
Explore categories from Cylinder
Moped fans also bought
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Strength class: 10.9 · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm
CHF 1.80
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Total length: 135 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: varnished · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Decompressor: No · Area of application: Tuning
CHF 42.90
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Total length: 65 mm · Manufacturer: swiing® ingenious parts · Width: 47 mm · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Area of application: Tuning · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Hole spacing inlet: 38 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Total height: 53.5 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Height flange center hole: 42 mm · Total length: 38 mm
CHF 44.90
GPO 45 mm piston (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Weight piston kit: 98 g
CHF 49.90
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 26.5 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44
CHF 14.90
AKOA 45 mm cylinder head black | Puch E50 / ZA50 (wind cooled) / ZA50 (cat.) / Z50
Manufacturer: AKOA · Width: 123.2 mm · Material: Aluminum · Camouflaged: No · Surface: varnished · Ø cylinder: 45 mm · Height: 54.5 mm · Total length: 132.2 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 44.90
Working late? Evening hours on Thursday until 20:00
