Complete resonance exhaust system / resonance exhaust for Puch Maxi, Puch X30 NG-2A (with modifications to the manifold) and Puch X30 Sport mopeds.
Optically an ordinary cigar exhaust, but a counter-cone is incorporated inside,
which turns the supposedly original silencer into a resonance exhaust.
For all those who want to combine original looks with tuning.
The special exhaust has a pleasant volume even at higher engine speeds.
Tailpipe dimension:
- Outer diameter: 70 mm
- Internal connection diameter: 28 mm
- Outer connection diameter: 30 mm
- Total length: 73 cm
All individual parts such as clamps, seal and flame tube, which are required for the installation of the exhaust, are included in the scope of delivery.
Note: Depending on the frame dimensions, an additional retaining plate may be required for installation.
Other exhaust sets and the additional bracket mentioned above can be found in the accessories section.
The set includes the following fixed parts:
Material: Sealing carton, Sheet metal (steel) · Place of use: Outlet · Thickness: 2.1 mm · Reinforced: Yes · Ø outlet inside: 27 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.3 mm · Area of application: Tuning
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Total length: 730 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 24 mm · Ø outside: 28 mm · Total length: 295 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Nominal diameter: 70 mm · Clamping diameter: 67 - 71 mm · Width: 28 mm · Thickness: 2 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm
Details
| Manufacturer | swiing |
| Total length | 730 mm |
| Material | Steel |
| Color | Chrome |
| Surface | chrome-plated |
| Ø outside | 70 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Mounting type | Screwed clamp |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
66HEROES Exhaust bracket 75 mm flat Inox
Manufacturer: 66HEROES · Thickness: 4 mm · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 75 mm · Total length: 106 mm · Number of fixing points: 2 pcs
CHF 9.95
CHF 12.50
swiing® ingenious resonance exhaust set Ø 28 / 70 mm camouflaged | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Total length: 730 mm · Color: Chrome · Ø Silencer: 70 mm · Ø Internal connection: 28 mm · Ø outside: 70 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
CHF 137.50
CHF 152.90
Moped fans like you also bought:
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Total length: 135 mm · Ø cylinder: 44 mm · Height: 55 mm · Candle thread: short · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
CHF 42.90
Flame tube 28 mm chrome | Puch Maxi S, N / X30 Sport
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø inside: 24 mm · Ø outside: 28 mm · Total length: 295 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
CHF 16.90
66HEROES Exhaust bracket 75 mm flat Inox
Manufacturer: 66HEROES · Thickness: 4 mm · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 75 mm · Total length: 106 mm · Number of fixing points: 2 pcs
CHF 9.95
CHF 12.50
Collection only possible with online purchase and appointment.
