Cylinder cover with 45 mm combustion chamber diameter suitable for Puch Maxi S/ N, Puch X30 Sport NS/ NL, Puch X30 Sport N-2AH, as well as converted Puch Supermaxi LG1/ LG2 mopeds.
A good replica of the original CH model with small cooling fins, which is cooled by ambient air (airstream).
The cylinder head does not have a mount for fitting a decompressor.
This head is the best choice for your 45cc Airsal, Swiing, Athena, GPO or ParmaKit racing kit (racing cylinder), especially because it has small cooling fins and is therefore "camouflaged".
Dimension (L×W×H): 13.5 × 12.5 × 5.5 cm
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Aluminum |
| Ø cylinder | 45 mm |
| Surface | sandblasted |
| Total length | 135 mm |
| Hole pattern [mm] | 44 x 44 |
| Candle thread | short |
| Decompressor | No |
| Width | 125 mm |
| Height | 55 mm |
| Number of fixing points | 4 pcs |
| Camouflaged | Yes |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
CHF 9.90
swiing® ingenious gasket set 44 - 45 mm cylinder | Puch
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 9.90
Not in stock
Autosol Brake Cleaner 500 ml
Manufacturer: Autosol · Contents [ml]: 500 ml · Area of application: Chemistry · Area of application: Cleaner · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 13.90
CHF 27.80/l
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Width: 125 mm · Material: Aluminum · Surface: varnished · Area of application: Tuning · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Height: 55 mm · Decompressor: No · Camouflaged: Yes
CHF 42.90
Moped fans like you also bought:
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 70 ccm · Nominal diameter: 45 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Number of fixing points: 4 pcs · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes
CHF 99.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SRE · Nozzle block: 2.17 · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Mixed oil connection: No · Height: 95 mm · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® ingenious 45 mm cylinder kit 70 ccm CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 23.6/21.2 x 14.7 · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 38 mm
CHF 99.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 17 mm · Carburetor type: SRE · Nozzle block: 2.2 · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Total length: 65 mm · Ø Air filter connection: 27.5 mm · Width: 47 mm · Mixed oil connection: No · Height: 89 mm · Height: 109 mm · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Hole spacing inlet: 38 mm · Total length: 38 mm · Ø inside: 17 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 44.90
Collection only possible with online purchase and appointment.
