TECNO «off road EVO» exhaust suitable for your Puch Maxi moped / moped.
This is a sporty exhaust system designed specifically for tuning cylinders with a straight outlet. The system impresses with its striking design and a powerful, precise sound that clearly underlines its sporty character.
The curved pipe between the resonance chamber and rear silencer creates additional space in the leg area. Nevertheless, as is usual with performance-oriented exhaust systems, high surface temperatures can occur, so appropriate touch protection or caution is required.
All fuel tap positions are possible, as is the installation of the right-hand side bar.
Scope of delivery:
- Exhaust with rear silencer
- Mounting bracket
- Rubber bearing
- 3D brass nut
Note: When installing the exhaust system, rework may be required on the bracket on the cylinder studs. The paint coating does not withstand heat well and can quickly melt off in the heat range. In addition, the side trim on the right is no longer possible once the pot has been fitted.
| Manufacturer | TECNO |
| Material | Steel |
| Surface | raw |
| Ø Silencer | 50 mm |
| Total length | 820 mm |
| Ø Flame tube outside | 25 mm |
| Exhaust type | Cone / double cone, Snail |
| Mounting type | Stud bolts & nuts |
| Flame tube attachment | Stud bolts & nuts |
| Number of fixing points | 4 pcs |
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9
CHF 2.00
Washer M6 standard (6.4/12/1.6) galvanized
Nominal diameter inside: 6 mm · Material: Steel · Surface: galvanized (blue) · Ø inside: 6.4 mm · Ø outside: 12 mm · Nominal diameter (thread): 6 mm · Thickness: 1.6 mm · Hardness [HV]: 140 HV · Thread size: M6 · Pony OEM number: A4515 · Sachs OEM no.: 0944 142 002
CHF 0.40
MOTIP heat-resistant clear lacquer (matt) 400 ml
Temperature resistance (min.): 0 - 800 °C · Manufacturer: MOTIP · Contents: 400 ml · Area of application: Paint & varnish · Color: transparent · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 62.25/l
M6x16 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 20 mm · Nominal diameter (thread): 6 mm · Shank: No · Thread length: 16 mm · Drive: External hexagon · Screw head: Hexagon · Strength class: 8.8 · Width across flats: 10 mm
CHF 1.20
TECNO exhaust "off road EVO" black | Puch
Manufacturer: TECNO · Material: Steel · Color: black-matt · Total length: 820 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cone / double cone · Exhaust type: Snail · Mounting type: Stud bolts & nuts · Number of fixing points: 4 pcs · Flame tube attachment: Stud bolts & nuts
CHF 139.90
Explore categories from Exhaust system
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
Not in stock
GPO screw set for galvanized engine mounting | Puch
Storage method: Sack · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Thread type: M8x1.25 (standard thread) · Shank: Yes · Thread length: 23.5 mm · Drive: External hexagon · Storage box dimension [mm]: 100 x 90 x 10 · Screw head: Hexagon · Number of components: 12 pcs · Strength class: 8.8 · Width across flats: 13 mm
CHF 8.90
GPO screws galvanized (5 pieces) Cast iron hub | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Shank: No · Thread length: 25 mm · Drive: Hexagon socket · Screw head: Cylinder head · Number of components: 5 pcs
CHF 5.90
Fortune / Merrick 2.50 - 2.75 x 17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width: 2.5 - 2.75 " · Tire width: 2.75 " · Tire width [mm]: 63.5 - 69.85 · Width: 2 1/2 " · Width: 2 3/4 " · Tire height [%]: 100 · Wheel size: 17 " · Old designation: 21 x 2.5 " · Old designation: 21 x 2.75 "
CHF 11.90
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
