Complete wheel axle for cast and spoke wheels of your Piaggio Ciao moped / moped.
The set contains all the necessary washers, nuts, cones, bearing balls and dust rings.
The cone and lock nut on the side of the brake anchor plate are already pre-assembled. This provides the necessary distance and eliminates the need for time-consuming spacing.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 150 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Piaggio | Ciao - P , SC , PX , C24 |
Ratings
Accessories & related products
swiing® ingenious wheel axle with bearing conversion kit cast wheel | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Diameter: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø inside: 11.25 mm · Total length: 150 mm · Ball bearing closed: Yes
CHF 59.90
Not in stock
CEV speedo drive 16" NOS | Piaggio Ciao, SI, Bravo
Manufacturer: CEV · Material: Aluminum · Color: silver · Thread type: MF10x1 (fine pitch thread) · Ø axle: 11 mm · 4-edge speedometer cable: 1.8 mm · Ø mounting hole: 11.1 mm · Ø outside: 40 mm · Overall width outside: 47.7 mm · Wheel size: 16 " · Total height: 50.7 mm
CHF 89.90
swiing® revival wheel axle M11x1 x 150 mm front wheel | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11 mm · Shank length: 25 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 57 mm · Thread length: 67 mm · Total length: 150 mm · Piaggio OEM number: 143555
CHF 14.70
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Ø outside: 11 mm · Number of components: 6 pcs · Material: Steel · Area of application: Standard · Drive: External hexagon · Total length: 25 mm · Screw head: Hexagon · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Width across flats: 11 mm · Thread length: 19.5 mm
CHF 3.90
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Ø outside: 16 mm · Ø outside: 22 mm · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Color: gold · Drive: External hexagon · Total length: 50 mm · Ø Bearing inside: 12.85 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
CHF 29.90
Collection only possible with online purchase and appointment.
