Cable clamp screw for the front wheel on your Piaggio Ciao, Si, Bravo and Boxer or also for universal use on other mopeds and small motorcycles.
The brake cable is pulled around the tab of the cable clamp and clamped using the M7 screw supplied and reliably releases the front brake when pulled.
Screw length: 25 mm
Thread length: 19.5 mm
Thread: M7
Wrench size: hexagon SW11
Ø outer round hole: 11 mm
You can find more cable clamps / brake cable clamps in the accessories section.
Made by the Italian brand CIF.
Original Piaggio spare part number: 154533
| Screw head | Hexagon |
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M7x1 (standard thread) |
| Number of components | 6 pcs |
| Drive | External hexagon |
| Ø outside | 11 mm |
| Area of application | Standard |
| Total length | 25 mm |
| Thread length | 19.5 mm |
| Width across flats | 11 mm |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Thread type: M6x1 (standard thread) · Manufacturer: Magura · Total length: 15 mm · Area of application: Standard · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Thread length: 7 mm · Ø Bundle: 6 mm · Width across flats: 7 mm
CHF 2.50
swiing® revival clamp brake cable | Pony / Cilo (P8343)
Manufacturer: swiing® revival parts · Number of components: 3 pcs · Surface: galvanized (blue) · Ø outside: 12 mm · Total length: 17 mm · Material: Steel · Ø Cable bushing: 2.9 mm · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 8.5 mm · Width across flats: 10 mm · Thread length: 9 mm · Thread type: M6x1 (standard thread)
CHF 3.40
Clamps, nipples & set screws set 73 pcs.
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Storage method: Plastic box · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Storage box dimension [mm]: 18.5 x 11.0 x 1.8 cm · Screw head: Hexagon · Number of components: 73 pcs
CHF 59.90
swiing® revival clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Drive: External hexagon · Screw head: Hexagon · Manufacturer: swiing® revival parts · Ø Cable bushing: 2.1 mm · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.9 mm · Total length: 21 mm · Width across flats: 11 mm · Width across flats: 14 mm · Number of components: 3 pcs · Thread type: M7x1 (standard thread) · Thread length: 9.5 mm · Alternative version of the Piaggio OEM number: 27348
CHF 5.40
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Total length: 21.5 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Width across flats: 11 mm · Width across flats: 14 mm · Thread length: 11 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 154533
CHF 5.80
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Total length: 20.5 mm · Drive: External hexagon · Thread length: 13.5 mm · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Width across flats: 11 mm · Number of components: 7 pcs · Area of application: Original · Piaggio OEM number: 154533
CHF 16.90
swiing® ingenious clamping screw front brake reinforced M8 | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.9 mm · Total length: 21 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Thread length: 9.5 mm · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Width across flats: 13 mm · Width across flats: 14 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 154533
CHF 7.40
swiing® ingenious clamping screw rear brake reinforced M8 | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Ø shaft: 10.5 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Total length: 21.5 mm · Screw head: Hexagon · Width across flats: 13 mm · Width across flats: 14 mm · Number of components: 3 pcs · Thread length: 11 mm · Alternative version of the Piaggio OEM number: 154533
CHF 7.80
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm
CHF 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black
CHF 19.90
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Total length: 21.5 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Width across flats: 11 mm · Width across flats: 14 mm · Thread length: 11 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 154533
CHF 5.80
Collection only possible with online purchase and appointment.
