Complete screw set for the frame of your Piaggio Ciao PX or C24 moped / moped.
The PX is the model with round seat post and rear light on the luggage carrier. The C24 can be recognized by the sprung, square seat post and the rear light on the luggage carrier.
The screw set consists of galvanized steel screws.
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:
- Headlight
- Fork swing arms
- Front and rear mudguards
- Cable duct under tank
- Engine mounting
- Zünd coil
- Splash guard under carburettor
- Pump holder under side guard
- Footboard holder and footboard
- Saddle and suspension
- Equipmentand struts and swing arm
- Pannier clamp and luggage hooks
- Rear light on luggage
- Exhaust
- Chain tensioner
- Rear wheel hub and gearbox
- Rear wheel hub and gearbox Gearbox
- Number plate or holder
Note: As the bolt set is designed for two different model series, individual bolts are not required and will remain unused.
Parts such as spacers and rubber buffers for the mudguard can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Piaggio | Ciao - PX , C24 |
Accessories & related products
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 8 pcs · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Screw head: Panhead · Nominal diameter (thread): 5 mm · Thread type: M5x0.8 (standard thread) · Area of application: Standard
CHF 4.90
Explore categories from Screws & fastener sets
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
CHF 2.00
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Color: black · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
CHF 29.90
Hot
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm · Piaggio OEM number: 189525 · Piaggio OEM number: 257073 · Alternative version of the Piaggio OEM number: 103089
CHF 9.90
ARUSU Headlight with Parking Light, Black | Piaggio Ciao PX, C24
Width: 125 mm · Height: 90 mm · Manufacturer: ARUSU · Housing material: Plastic · Lens material: Plastic · Color: black · Surface: raw · Bulb holder: P26s · Bulb holder: Soffit pear · Number of fixing points: 2 pcs · Tension: 6 V · Tension: 12 V · Area of application: Standard · Test mark: none · Speedometer recording: 48 mm · Depth: 147 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6 mm · Mounting type: Screws · Piaggio OEM number: 584240
CHF 26.90
DMP headset set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: DMP · Material: Steel · Surface: galvanized (blue) · Ø inside: 27 mm · Ø outside: 42 mm · Ø mounting frame: 30.05 mm · Color: silver · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Height: 10.5 mm · Height: 17 mm · Thread type: FG25.4 (1" 24G) · Piaggio OEM number: 814231
CHF 19.90
Working late? Evening hours on Thursday until 20:00
