High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | varnished |
| Total height | 250 mm |
| Stand base - center mount (A) | 232 mm |
| Total width of stand base (B) | 200 mm |
| Color | black |
| Wide receptacle (C) | 78 mm |
| Ø Receptacle (D) | 14 mm |
| Wide upright foot (F) | 20 mm |
| Piaggio | Ciao - PX, C24 |
Accessories & related products
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents [g]: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Temperature resistance (min.): -40 - 1100 °C · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 11.90
CHF 119.00/kg
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Ø outside: 14 mm · Total length: 690 mm · Color: black · Ø Silencer: 70 mm · Ø Internal connection: 22 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
CHF 74.90
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Area of application: Tuning · Decompressor: Yes · Camouflaged: No
CHF 144.90
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Surface: varnished · Manufacturer: Made in Italy · Material: Steel · Total height: 250 mm · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Color: black · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Piaggio OEM number: 104626
CHF 29.90
Main stand 14 mm axle | Piaggio Ciao PX, C24
Surface: varnished · Material: Steel · Total height: 245 mm · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Color: black · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Piaggio OEM number: 25523001
CHF 22.90
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Height: 96 mm · Choke control: Hand choke · Total length: 46 mm · Nominal diameter: 13 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Width: 60 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Area of application: Tuning
CHF 66.90
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Tension: 6 V · Tension: 12 V · Housing material: Plastic · Lens material: Plastic · Height: 90 mm · Color: black · Ø External connection: 6.3 mm · Bulb holder: P26s · Width: 125 mm · Depth: 147 mm · Test mark: none · Speedometer recording: 48 mm · Battery operated: No · Switch included: Yes · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
CHF 37.90
Tail light black | Piaggio Ciao PX, C24, Bravo
Depth: 43 mm · Width: 130 mm · Height: 58 mm · Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Color: black · Color: red · Bulb holder: BA9s · Mounting type: Nuts & bolts · Brake light: No · Battery operated: No · Reflectors: Yes · Number of fixing points: 2 pcs
CHF 18.90
GPO control bearing set | Piaggio Ciao
Surface: galvanized (blue) · Manufacturer: GPO · Material: Steel · Ø outside: 41.4 mm · Ø outside: 42 mm · Bearing type: Bearing ring · Height: 10.5 mm · Height: 17 mm · Ø mounting frame: 30.05 mm · Color: silver · Thread type: FG25.4 (1" 24G) · Ø inside: 27 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
CHF 18.90
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
CHF 19.90
Collection only possible with online purchase and appointment.
