Complete bolt set made of stainless steel for the frame of your Piaggio Ciao PX or C24 moped / moped.
The PX is the model with round seat post and tail light on the luggage carrier. The C24 can be recognized by the sprung, square seat post and the rear light on the luggage carrier.
The screw set consists of chrome steel screws (stainless steel).
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:
- Headlight
- Fork swing arms
- Front and rear mudguards
- Cable duct under tank
- Engine mounting
- Zünd coil
- Splash guard under carburettor
- Pump holder under side guard
- Footboard holder and footboard
- Saddle and suspension
- Equipmentand struts and swing arm
- Pannier clamp and luggage hook
- Return light on luggage
- Exhaust
- Chain tensioner
- Rear wheel hub and gearbox
- Transmission
- Chain tensioner Gearbox
- Number plate or holder
Note: As the bolt set is designed for two different model series, individual bolts are not required and will remain unused.
Parts such as spacers and rubber bumpers for the mudguard can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (known as Nirosta®) |
Suitable for the following models
| Piaggio | Ciao - PX, C24 |
Accessories & related products
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 8 pcs · Drive: Cross recess · Screw head: Panhead · Thread type: M5x0.8 (standard thread) · Area of application: Standard
CHF 4.90
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Number of components: 2 pcs · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
CHF 2.00
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Width: 125 mm · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Depth: 147 mm · Switch included: Yes · Battery operated: No · Mounting type: Screws · Height: 90 mm · Color: black · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
CHF 37.90
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Width: 130 mm · Depth: 43 mm · Height: 58 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 18.90
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: FG25.4 (1" 24G) · Color: silver · Ø inside: 27 mm · Ø mounting frame: 30.05 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
CHF 18.90
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black
CHF 19.90
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Total length: 53.5 mm · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes
CHF 29.50
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (known as Nirosta®) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
CHF 29.90
Collection only possible with online purchase and appointment.
