Octagonal locking nut made of stainless steel with a left-hand thread, compatible with the pedal axle of various vintage mopeds.
Among others, this lock nut fits 50/2 and 503 models such as the Alpa Kristall, Alpa Oltenia, Alpa Sport, Alpa Tornado, Caravelle, Comet, Eiger, Goericke, Hercules Prior, Pony Junior, Rico, Rixe, Walco, as well as Puch X30 Pionier and Tigra mopeds.
Thread: 18 x 24G left-hand (Ø 18 mm, left-hand thread)
Wrench size (SW): 27 mm Octagonal
height: 5 mm
Material: Chrome steel (colloquially known as Nirosta)
You can find mounting hardware and other fasteners in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Standard |
| Surface | electropolished |
| Nut type | Octagonal nut |
| Thread type | 18x24G |
| Drive | Outer eighth edge |
| Width across flats | 27 mm |
| Height | 5 mm |
| Puch |
| Sachs |
Accessories & related products
GPO pedal cranks chrome 148 mm pair
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Color: Chrome · Crank length (center-center): 120 mm · Width: 42 mm · Ø Pedal wedge: 9 mm · Ø Pedal axle: 16 mm · Total length: 148 mm · Wide intake: 17.5 mm · Cranking (offset): 30 mm
CHF 69.90
swiing® revival Locknut 18–24G LH Hex Pedal Axle Stainless Steel
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Nut type: Hexagon nut · Thread type: 18x24G LH · Nominal diameter (thread): 18 mm · Drive: External hexagon · Width across flats: 27 mm · Height: 4.2 mm
CHF 10.90
swiing® revival pedal axle 28 teeth chrome | Tigra Pionier P30-74, P30-R, Caravelle
Chain pitch: 1/2" x 3/16" · Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Pedal shaft type: with thread · Thread type: 18x24G LH · Color: Chrome · Number of teeth: 28 pcs · Wavelength from wreath: 60 mm · Wavelength from wreath: 150 mm · Ø Pedal arm holder: 15.8 mm · Total length: 210 mm · Ø Bearing support: 17.8 mm
CHF 87.90
Explore categories from Hub & axle
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 10.90
CHF 24.22/l
swiing® revival manual shift spring | Sachs 50/2, 503 2AL, 2BL (A1337)
Spring design: Tension spring · Length spring hook: 8 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: burnished · Color: gray · Ø inside: 6 mm · Ø wire: 1.25 mm · Ø outside: 8.5 mm · Total length: 28 mm · Pony OEM number: A1337 · Sachs OEM no.: 0239 102 100
CHF 10.90
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Ø outside: 30 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
CHF 5.40
swiing® revival Locknut 18–24G LH Hex Pedal Axle Stainless Steel
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Nut type: Hexagon nut · Thread type: 18x24G LH · Nominal diameter (thread): 18 mm · Drive: External hexagon · Width across flats: 27 mm · Height: 4.2 mm
CHF 10.90
Working late? Evening hours on Thursday until 20:00
