Brake lever for the front wheel on your Piaggio SI PTT moped / moped.
Brake cam mount: 12.5 x 8.2 mm
Ø bore: 11.2 mm
Crushing: 4 mm
Total length: 72 mm
Material thickness: 4 mm
Material: steel, blue galvanized
Note: The two-sided mount of this brake lever is larger than on all other models of the Piaggio Ciao, Bravo, Boxer and the standard versions of the Piaggio Si Europe and Montecarlo.
Only some late Cilo and Pony Cross models also have the larger mount - here the lever fits, but differs slightly in its curvature.
The corresponding brake cam, brake cable and cable clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Place of use | Brake anchor plate |
| Color | silver |
| Total length | 72 mm |
| Thickness | 4 mm |
| Height | 8 mm |
Suitable for the following models
| Pony / Cilo (Beta 521 & 512) | Pony Cross 521 (frame) |
| Piaggio | Si |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard
CHF 2.40
swiing® revival clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Number of components: 3 pcs · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Thread type: M7x1 (standard thread) · Ø Cable bushing: 2.1 mm · Total length: 21 mm · Screw head: Hexagon · Ø shaft: 10.9 mm · Thread length: 9.5 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Alternative version of the Piaggio OEM number: 27348
CHF 5.40
swiing® ingenious clamping screw front brake reinforced M8 | Piaggio Ciao, SI, Bravo, Boxer
Number of components: 3 pcs · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Ø Cable bushing: 2.1 mm · Screw head: Hexagon · Total length: 21 mm · Ø shaft: 10.9 mm · Thread length: 9.5 mm · Width across flats SW: 13 mm · Width across flats SW: 14 mm · Alternative version of the Piaggio OEM number: 154533
CHF 7.40
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Width: 9 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Total length: 53.5 mm · Ball bearing closed: Yes
CHF 29.50
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Number of components: 7 pcs · Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Area of application: Original · Drive: External hexagon · Thread type: M7x1 (standard thread) · Total length: 20.5 mm · Screw head: Hexagon · Thread length: 13.5 mm · Width across flats SW: 11 mm · Piaggio OEM number: 154533
CHF 16.90
Collection only possible with online purchase and appointment.
