Engine mount 2.0 for Sachs 503 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3 or 4.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Motor bracket |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
CHF 74.80
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Total length: 55 mm · Total length: 75 mm · Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
CHF 9.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm
CHF 43.90
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Place of use: Carburetor · Number of components: 1 pcs · Surface: raw · Color: black · Area of application: Standard · Cord thickness: 1.4 mm · Ø inside: 17.2 mm · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
CHF 2.90
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
CHF 24.90
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened
CHF 19.90
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Area of application: Standard · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm
CHF 39.90
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Total length: 290 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Diameter: 19 mm · Number of components: 1 pcs · Height: 80 mm · Surface: galvanized (blue) · Surface: rubberized · Area of application: Special tool · Thickness: 5 mm · Ø inside: 27 mm · Ø outside: 93 mm · Ø Pin: 8 mm
CHF 47.90
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
CHF 74.80
Collection only possible with online purchase and appointment.
