Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
| Material | Steel |
| Manufacturer | swiing® ingenious parts |
| Surface | galvanized (blue) |
| Area of application | Motor bracket |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Total length: 370 mm · Material thickness: 3.5 mm · Width: 245 mm · Height: 340 mm · Area of application: Motor bracket · Hole spacing: 21.5 mm
CHF 74.90
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 9.90
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Total length: 120 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool
CHF 43.90
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 19.90
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Height: 16 mm · Manufacturer: swiing® revival parts · Ø outside: 75 mm · Number of components: 4 pcs · Ø inside: 64 mm · Area of application: Special tool · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
CHF 29.90
Not in stock
swiing® revival puller clutch basket manual | Sachs
Width across flats Screw: 19 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Number of components: 4 pcs · Thickness: 25 mm · Total length: 106 mm · Area of application: (Dis)assembly tool
CHF 32.90
GPO piston pin extractor Ø 10, 12, 14 mm
Material: Steel · Surface: burnished · Total length: 130 mm · Manufacturer: GPO · Number of components: 7 pcs · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 93 mm · Number of components: 1 pcs · Ø inside: 27 mm · Area of application: Special tool · Diameter: 19 mm · Ø Pin: 8 mm
CHF 47.90
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Total length: 370 mm · Material thickness: 3.5 mm · Width: 245 mm · Height: 340 mm · Area of application: Motor bracket · Hole spacing: 21.5 mm
CHF 74.90
Collection only possible with online purchase and appointment.
