Additional weight for MVT, Selettra and PVL internal rotor race systems suitable for various mopeds, mopeds and small motorcycles (e.g. Puch Maxi, Puch X30 Sport, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler etc.). To be able to use the additional weight, the swiing adapter plate must be fitted beforehand. The additional weight can then be attached to it.
We recommend securing all screws with Loctite.
Ø inside: 24.5 mm
Ø outside: 65 mm
Plate thickness: 4 mm
Weight of the plate without screws: 80 grams
Weight of the plate with screws: 87 grams
Material: Steel, galvanized
The additional weight gives your engine a smooth, even running when stationary and improves the "starting behaviour". Depending on the setting, even more torque can be achieved with the additional weight.
You can find the swiing adapter plate (100g / 110g) in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Performance, Racing, High End, Tuning |
| Ø outside | 65 mm |
| Ø inside | 24.5 mm |
| Number of fixing points | 3 pcs |
| Weight | 87 g |
| Thickness | 4 mm |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 503 - AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3
Ø mounting hole: 6 mm · Manufacturer: swiing® ingenious parts · Height: 25 mm · Weight: 116 g · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Ø outside: 110 mm · Color: black · Ø bolt circle: 48 mm · Number of fixing points: 6 pcs · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105
CHF 59.90
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Number of fixing points: 3 pcs
CHF 19.30
Screw M6x8 countersunk head hexagon socket, galvanized (10.9 strength)
Drive: Hexagon socket · Screw head: Countersunk head · Ø External head: 12 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 8 mm · Thread length: 8 mm · Shank: No · Number of components: 1 pcs · Strength class: 10.9
CHF 2.20
Moped fans also bought
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
CHF 2.40
CHF 2.10
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 6 mm · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
CHF 15.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 8.90
CHF 19.78/l
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Height: 95 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
CHF 79.90
swiing® revival nozzle set M3.5 (10 pcs. of your choice) Bing SRE, SRA, SRC, SRF
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100
CHF 34.90
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Number of fixing points: 3 pcs
CHF 19.30
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 110 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 50 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 9 mm · Number of fixing points: 4 pcs
CHF 36.50
Collection only possible with online purchase and appointment.
