Additional weight for MVT, Selettra, and PVL internal-rotor racing ignition systems compatible with various mopeds and small motorcycles (e.g., Puch Maxi, Puch X30 Sport, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler, etc.). To use the additional weight, you must first install the swiing® adapter plate. The additional weight can then be attached to it.
We recommend securing all screws with Loctite.
Inner diameter: 24.5 mm
Outer diameter: 65 mm
Plate thickness: 4 mm
Weight of the plate without screws: 124 grams
Weight of the plate with screws: 131 grams
Material: galvanized steel
The additional weight gives your motor a smooth, even run when stationary and improves its “start-up response.” Depending on the settings, the additional weight can even increase torque.
You can find the swiing® adapter plate (100g / 110g) in the accessories section.
A sophisticated product meeting the highest standards from the swiing® quality brand.
| Ø inside | 24.5 mm |
| Manufacturer | swiing® ingenious parts |
| Ø outside | 65 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Thickness | 4 mm |
| Weight | 131 g |
| Number of fixing points | 3 pcs |
| Area of application | Performance, Racing, High End, Tuning |
| Universal | |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 503 - AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® ingenious fan blade, black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3
Ø inside: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Height: 25 mm · Ø bolt circle: 48 mm · Ø outside: 110 mm · Ø mounting hole: 6 mm · Number of fixing points: 6 pcs · Weight: 116 g · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105
CHF 59.90
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Ø outside: 65 mm · Weight: 87 g · Thickness: 4 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 3 pcs
CHF 17.90
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Ø inside: 24.5 mm · Thickness: 9 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 50 mm · Ø outside: 65 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Weight: 110 g
CHF 36.50
Normio M6x10 Countersunk Hex Socket Screw, Strength Class 10.9, Zinc-Plated
Manufacturer: Normio · Total length: 10 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Drive: Hexagon socket · Screw head: Countersunk head · Thread length: 10 mm · Ø External head: 12 mm · Shank: No · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Number of components: 1 pcs
CHF 2.20
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray · Ø Pin: 3.94 mm
CHF 12.50
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
CHF 2.40
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
CHF 7.40
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Ø cable: 7 mm · Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Direction of rotation: left · Ø mounting plate: 96 mm · Mounting type: Screws · Tension: 12 V · Performance: 65 W · Weight: 268 g · Ø Flywheel outside: 49.2 mm · Number of fixing points: 2 pcs · Area of application: Tuning
CHF 364.90
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Ø outside: 65 mm · Weight: 87 g · Thickness: 4 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 3 pcs
CHF 17.90
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Ø inside: 24.5 mm · Thickness: 9 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 50 mm · Ø outside: 65 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Weight: 110 g
CHF 36.50
Working late? Evening hours on Thursday until 20:00
