Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
Details
Manufacturer | swiing® ingenious parts |
Material | Chrome steel (stainless steel) |
Surface | blank |
Thickness | 1.8 mm |
Weight | 100 g |
Ø inside | 71.8 mm |
Ø outside | 117 mm |
Number of fixing points | 4 pcs |
Ø mounting hole | 5 mm |
Area of application | Performance, Racing, High End, Tuning |
Ø bolt circle | 101 mm |
Suitable for the following models
Universal | |
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) |
Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 521 (Motor) |
Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Weight: 340 g · Mounting type: Screws · Number of fixing points: 6 pcs · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm
CHF 299.90
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Weight: 424 g · Mounting type: Screws · Ø cable: 7 mm · Ø Flywheel outside: 62 mm · Number of fixing points: 3 pcs
CHF 279.90
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm · Thread type: MF27x1 LH (fine/left-hand thread)
CHF 95.90
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Tension: 12 V · Ø outside: 90 mm · Performance: 60 W · Cable length: 640 mm · Number of cables: 4 pcs · Ø inside: 27.5 mm · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs
CHF 149.90
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Color: black · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Weight: 87 g
CHF 59.90
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø outside: 117 mm · Weight: 250 g · Ø mounting hole: 5 mm · Ø inside: 71.8 mm · Ø bolt circle: 101 mm · Thickness: 5 mm · Number of fixing points: 4 pcs
CHF 25.80
HPI ignition box programmable (two ignition curves)
Total length: 63 mm · Manufacturer: HPI · Material: Plastic · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: red · Height: 28 mm · Width: 100 mm · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Number of fixing points: 2 pcs
CHF 307.40
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder
CHF 2.80
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Weight: 340 g · Mounting type: Screws · Number of fixing points: 6 pcs · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm
CHF 299.90
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Color: black · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Weight: 87 g
CHF 59.90
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø outside: 117 mm · Weight: 250 g · Ø mounting hole: 5 mm · Ø inside: 71.8 mm · Ø bolt circle: 101 mm · Thickness: 5 mm · Number of fixing points: 4 pcs
CHF 25.80
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
CHF 374.90
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Height: 13.5 mm · Weight: 87 g · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs
CHF 62.40