Additional weight made of chrome steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Weight | 250 g |
| Material | Chrome steel (stainless steel) |
| Surface | blank |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5 mm |
| Thickness | 5 mm |
| Ø inside | 71.8 mm |
| Ø bolt circle | 101 mm |
| Ø outside | 117 mm |
| Area of application | Performance, Racing, High End, Tuning |
Suitable for the following models
| Universal | |
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 521 (Motor) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Weight: 340 g · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Light coil voltage: 12 V · Tension: 12 V · Direction of rotation: left · Direction of rotation: right · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Area of application: Tuning
CHF 299.90
HPI racing ignition clockwise without light
Manufacturer: HPI · Weight: 424 g · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Ø Flywheel outside: 62 mm · Area of application: Tuning
CHF 279.90
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm
CHF 95.90
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Color: black · Tension: 12 V · Performance: 60 W · Number of cables: 4 pcs · Cable length: 640 mm · Number of fixing points: 6 pcs · Ø inside: 27.5 mm · Ø bolt circle: 80 mm · Ø outside: 90 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 149.90
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
CHF 59.90
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 19.90
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 307.40
Moped fans like you also bought:
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 34.90
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Weight: 340 g · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Light coil voltage: 12 V · Tension: 12 V · Direction of rotation: left · Direction of rotation: right · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Area of application: Tuning
CHF 299.90
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
CHF 59.90
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 19.90
HPI set racing ignition 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
CHF 374.90
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
CHF 62.40
Collection only possible with online purchase and appointment.
