Racing exhaust from SITO in the original look, designed to fit your Piaggio Si and Grillo moped.
This racing muffler is suitable for 38–46 mm cylinder kits.
An absolute top-of-the-line product.
Excellent craftsmanship, precise fit, and outstanding performance. On 75 ccm setups, this exhaust even outperforms the Simonini snail muffler in the lower RPM range.
Technical Specifications:
Connection Ø: 22 mm
; Outer Flame Tube Ø: 24 mm
In response to frequent questions, we’ve attempted to summarize the advantages and disadvantages compared to the Giannelli New Power below:
Advantages of the SitoPlus over the Giannelli New Power:
- Higher torque
- Fit
- Build quality
- Significantly quieter and therefore more discreet
- Stamped DGM number (Note: Still not approved for use in Switzerland)
Disadvantages compared to Giannelli New Power:
- Slightly lower top speed
- Responds slightly less to the throttle
You can find more exhaust systems and tuning parts for your Piaggio in the accessories section.
A quality product from the Italian manufacturer SITO.
| Manufacturer | SITO |
| Material | Steel |
| Color | black |
| Surface | varnished |
| Total length | 720 mm |
| Ø Silencer | 70 mm |
| Number of fixing points | 1 pcs |
| Ø Flame tube outside | 25 mm |
| Ø Internal connection | 22.3 mm |
| Exhaust type | Cylindrical |
| Ø outside | 14 mm |
| Mounting type | Welded lug |
| Flame tube attachment | Plug connection clamped |
| Piaggio | Si Grillo |
Accessories & related products
Hot 
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle thread: M5x0.8 (standard thread)
CHF 20.90
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Total length: 55 mm · Width: 60 mm · Height: 118 mm · Area of application: Tuning
CHF 74.90
swiing® revival screw set exhaust fastening Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Thread type: M8x1.25 (standard thread) · Number of components: 3 pcs · Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Thread length: 16 mm · Screw head: Hexagon · Shank: No · Width across flats: 13 mm
CHF 2.80
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle thread: M5x0.8 (standard thread)
CHF 20.90
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Spark plug socket: M4 · Suppressed: No · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 21 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 6.50
Hot
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Color: black · Ø outside: 53.2 mm · Width: 95 mm · Filter type: Foam · Height: 88.7 mm · Total length: 31.2 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Internal connection: 51 mm
CHF 19.90
Malossi cylinder head for 41 - 43 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Width: 87 mm · Total length: 122 mm · Height: 60 mm · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Area of application: Racing · Candle thread: long · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
CHF 72.90
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
CHF 144.90
Malossi cylinder head for 41 - 43 mm cylinder | Piaggio SI, Bravo
Manufacturer: Malossi · Camouflaged: No · Material: Aluminum · Ø cylinder: 41 - 43 mm · Total length: 134 mm · Width: 94 mm · Height: 52 mm · Hole pattern [mm]: 35 x 55 · Candle thread: short · Number of fixing points: 3 pcs · Area of application: Racing · Decompressor: Yes
CHF 69.90
Not in stock
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Color: black · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Width: 60 mm · Ø Output inside: 13 mm · Height: 118 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread)
CHF 69.90
Working late? Evening hours on Thursday until 20:00
